Overview
The Pro Comp K5061B is a 4-inch Stage 2 spacer kit with ES3000 front and rear shocks for the 1990–1995 Toyota 4Runner and Toyota Pickup. Steering knuckle spacers and front and rear crossmembers raise the front, and rear coil springs provide the lift at the back.
The Stage 2 package includes front sway bar spacers, bump stop extensions and upper control arm mount brackets. The rear lift is a block and U-bolt kit with coil springs, and the front shocks are ES3000 units.
Key features
- 4-inch lift height, Stage 2
- Steering knuckle spacers
- Front and rear crossmembers
- Front sway bar spacers
- Bump stop extensions
- Upper control arm mount brackets and rear coil springs
Spacers and the rear leaf
A Stage 2 spacer package usually means more change at the front, and that makes the relationship between the spacers and the control arms more important. Sway bar spacers move the bar’s pivot points, which affects roll stiffness and the way the front end settles on turns. Consider how the truck is driven before building a setup of this kind, since higher loads and towing put more demand on the front components.
Coil springs at the rear work with the block and U-bolt kit, so the rear axle position and the shock angles should be checked after the install. Older Toyota bushings and mounts tend to be worn, so replacing them during the job saves time later. Recheck the U-bolts after the first few drives, since they can settle under the new load.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5061B |
| UPC | 614901207293 |
| Lift height | 4 inch (lift height range 3 to 4.99 inches) |
| Lift kit stage | Stage 2 |
| Suspension type | Spacer |
| Front lift | Steering knuckle spacers |
| Rear lift | Coil springs with block and U-bolt kit |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
Vehicle fitment
It fits the 1990–1995 Toyota 4Runner in the SR5 version, and the 1990–1995 Toyota Pickup in the DLX and SR5 versions.
Only the 1990 through 1995 model years are on the list. Earlier and later Toyota trucks are not covered by this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Stage 2 spacers and upper control arm brackets shift the front geometry, so have the alignment and the driveline angles checked after the lift is installed.
What’s included
The kit includes steering knuckle spacers, front and rear crossmembers, front sway bar spacers, bump stop extensions, upper control arm mount brackets, rear coil springs with the block and U-bolt kit, and ES3000 front and rear shocks.









