Overview
The Pro Comp K4178B is a 6-inch lift kit with ES9000 shocks for the 2011–2016 Ford F-250 Super Duty. It includes replacement radius arms, specific rate coil springs at the front, and a rear lift built from lift blocks, U-bolts and add-a-leafs.
This is a Stage 1 kit. Confirm the stage before ordering, since it determines the front hardware you receive. The steering is corrected with a Pitman arm, and the kit includes a front track bar bracket and sway bar links.
Key features
- 6-inch lift height
- Replacement radius arms
- Specific rate coil springs and spacers
- Pitman arm steering correction
- Front track bar bracket and sway bar links
- Lift blocks, U-bolts and add-a-leafs at the rear
Before you buy the lift
Choosing a lift kit starts with deciding how much clearance the truck needs and how it will be used. A truck carrying a camper or towing loads the front and rear differently than one driven mostly on pavement, so think about payload before you start. Replacement radius arms and a Pitman arm are usually bought together because they change the front steering and control geometry as a set.
Once the kit is installed, the front springs and shocks work at a new angle. Shock length matters, so check that the shock package suits the lift and the tires you plan to run. Larger tires add rotating mass and can rub at full compression, which is worth checking before the first trip off road.
- Recheck U-bolt torque after the first few drives
- Inspect brake lines for stretch at full droop
- Confirm tire clearance before final assembly
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4178B |
| UPC | 70000538263 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 1 in the spec table (Stage II in the product name) |
| Suspension type | Radius arm or radius arm brackets |
| Front lift | Specific rate coil springs and spacers |
| Steering correction | Pitman arm |
| Rear lift | Lift blocks, U-bolts and add-a-leaf |
| Front shocks | ES9000 |
Vehicle fitment
It fits the 2011–2016 Ford F-250 Super Duty in the King Ranch, Lariat, Platinum, XL and XLT versions.
Coverage ends with the 2016 model year, so 2017 and newer trucks, and the 2008 through 2010 generation, are outside this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacement radius arms and a Pitman arm change the front suspension geometry, so the alignment should be set and the driveline angles checked once the lift is complete.
What’s included
The kit includes replacement radius arms, specific rate coil springs and spacers, the Pitman arm steering correction, a front track bar bracket, sway bar links, lift blocks, U-bolts and add-a-leafs, and ES9000 front shocks.









