Select your vehicle
-13%

Pro Comp 2.5 Inch Rear Lift Block with U-Bolt Kit – 58250

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 2.5-inch rear lift block kit with U-bolts
  • Tapered blocks for driveshaft angles
  • Universal fit, no vehicle listed
  • Part number 58250

Description

Overview

The 58250 is a 2.5-inch rear lift block kit with U-bolts for leaf spring trucks. The blocks are tapered to help the driveshaft angles.

A rear block kit raises the axle relative to the leaf springs. The U-bolts hold the axle to the springs, so they must be long enough to clear the added height.

Confirm the kit matches your truck’s leaf spring rear suspension before ordering. Check the driveshaft angles after installation.

Key features

  • 2.5-inch rear lift
  • Tapered lift blocks
  • U-bolts included with the block kit

Checking U-bolts and axle seating

U-bolts clamp the axle to the leaf springs, so their condition matters as much as the block itself. Threads that are rusted or stretched will not hold the clamp load, and bent legs can pinch the spring pack. Before installation, look at the thread ends, the nuts and the washers, and replace any part that shows damage.

When the lift is added, the spring pad and axle seat should line up squarely with the block. Tighten the nuts evenly in a cross pattern and recheck them after the first few miles. Brake lines and the parking brake cable may also need inspection, because the axle sits in a different position after the lift, and any stretch or rub can show up as a fault.

Specifications

Brand Pro Comp Suspension
Part number 58250
Position Rear
Lift 2.5 in
Includes U-bolt kit

Vehicle fitment

Confirm fit for your vehicle’s year, model and rear suspension before ordering.

A block kit is sized for a particular leaf spring setup. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check the driveshaft angles after installation, since the tapered blocks are meant to help with them. Confirm the U-bolts are long enough for the 2.5-inch lift before tightening the nuts.

What’s included

The 2.5-inch rear lift block kit with U-bolts.

Not included: any parts beyond the block kit and U-bolts.

Questions & Answers

Does the 58250 include U-bolts?

Yes. The kit includes U-bolts along with the 2.5-inch rear lift blocks. Confirm their length against your springs and axle before installation.

What lift does the 58250 give?

The specifications list a 2.5-inch lift. Confirm the U-bolt length against your springs and axle before installation, since the added height changes the length needed.

Is the 58250 a front or rear kit?

It is a rear lift block kit for the leaf spring setup only, so it is not used on the front axle and should not be fitted there.

How do I tell if the U-bolts are the right length?

Measure the thread length needed to clear the nuts and washers at the new height, and compare it with the U-bolt legs before tightening. Threads that are too short can strip, while legs that are too long can contact the axle.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon