Overview
The Pro Comp 95-300F is a 3-inch rear lift block kit for trucks with leaf spring rear suspension. Its tapered lift blocks are designed to help maintain driveshaft angles, and the kit is the part used to achieve rear lift on a leaf spring vehicle.
A block of this height raises the rear axle relative to the leaf springs, and the taper is part of the design rather than an extra feature. Confirm the vehicles and U-bolt length against your truck before installation.
Driveshaft angles change with any rear lift, so check them after installation. Confirm the lift height against your current suspension before ordering a 3-inch kit.
Key features
- 3-inch rear lift
- Tapered lift blocks
- Designed for leaf spring rear suspension
Choosing a lift height
Rear lift blocks sit between the axle and the leaf springs, so the axle moves down and away from the frame when they are fitted. That change alters the angle of the driveshaft, the length of the brake lines and the geometry of the rear suspension. Before choosing a height, measure your current ride height at the rear and decide how much lift the tires and fenders can accept without rubbing. A taller block is not always better, since the greater the lift, the more the driveline works at an angle.
Blocks are usually fitted with longer U-bolts, so check whether your existing set reaches around the axle at the new height. Many owners also replace the shock absorbers and the brake hose at the same time, because longer parts suit the new geometry. After the first few drives, retighten the U-bolt nuts and look at the driveshaft joints for binding or vibration.
- Measure rear ride height before ordering
- Check U-bolt length at the new height
- Inspect driveshaft joints after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 95-300F |
| Position | Rear |
| Lift | 3 in |
Vehicle fitment
Confirm fit for your vehicle’s year, model and rear suspension before ordering, since a rear lift block kit is sized for a specific leaf spring setup.
A rear lift block kit is sized for a specific leaf spring setup, so do not assume fit from the part name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the driveshaft angles after installation and confirm the U-bolts are long enough for the 3-inch lift. Install the blocks at the rear only.
What’s included
The 3-inch rear lift block kit.
Not included: U-bolts, if your truck needs new ones.









