Overview
The Pro Comp Suspension 22251 is a 3.5 inch rear lift block with U-bolt kit. The kit has tapered cast iron risers, four U-bolts, eight heavy duty flat washers and eight hi-nuts.
Key features
- 3.5 inch rear lift
- Tapered cast iron risers
- Complete U-bolt hardware
Choosing a larger lift
A larger rear lift puts more angle into the driveline, which makes checks on the pinion angle and U-joints more important than they would be with a small lift. The axle also sits farther from the body, so brake hoses, the shocks and any sway bar links are loaded differently. Fitting the kit with those parts in mind helps avoid binding or stretching once the vehicle is back on the road.
Cast iron risers are heavy and stable, which suits a rear lift that carries load. Their taper and the hardware should be looked over together, and any riser that shows cracks or movement should be replaced before further use.
- Check pinion angle after installation
- Inspect brake hoses for tension
- Look at shock travel and bump stop contact
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 22251 |
| UPC | 614901110210 |
| Lift height | 3.5 in |
| Riser material | Cast iron |
| Risers | 2 |
| U-bolts | 4 |
| Flat washers | 8 heavy duty |
| Hi-nuts | 8 |
| Packaging | Boxed |
Vehicle fitment
It is a direct fit kit. Measure your spring pack before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At 3.5 inches the change in driveshaft angle is larger, so check the pinion angle and the driveline after installation.
What’s included
Two cast iron riser blocks, four U-bolts, eight heavy duty flat washers and eight hi-nuts.





