Overview
The Pro Comp 1.5-inch Rear Block and U-bolt Kit, part number 62208, adds 1.5 inches of rear lift to a leaf-spring Ford F-150 4WD truck. It fits 4WD 2021 to 2026 Ford F-150 trucks and does not fit Raptor models.
The kit uses tapered lift blocks and u-bolts. The tapered blocks are designed to improve and retain driveshaft angles, which is why the kit uses blocks rather than a plain spacer.
Key features
- Tapered lift blocks designed to improve and retain driveshaft angles
- 1.5-inch rear lift height
- Lift blocks and u-bolts as the rear lift method
- Includes all necessary hardware and instructions
- Designed for leaf spring suspension
- 4WD models only
Lift blocks and driveline angle
A lift block sits between the axle and the leaf spring pack and raises the axle without changing the spring itself. Because the axle moves in an arc as the suspension cycles, the driveshaft angles change, and that is the main reason blocks are paired with u-bolts long enough to hold the axle securely. Tapered blocks are meant to keep those angles within a workable range, but the driveline still deserves a look once the lift is in place.
Raising the rear end also changes how the shock absorbers, brake hoses and exhaust sit. Check that the shocks are not overextended at full droop, that the brake hoses have slack, and that the fuel and exhaust lines clear the axle through its travel. Torque the u-bolt nuts in a crisscross pattern and recheck them after the first few drives, since leaf spring hardware can settle as the truck is used.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 62208 |
| Lift height | 1.5 inches, rear |
| Rear lift method | Lift blocks and u-bolts |
| Drive | 4WD only |
| Raptor models | Not fit |
| Hardware | All necessary hardware included |
| Fitment label | Direct Fit |
Vehicle fitment
It fits 4WD 2021 to 2026 Ford F-150 trucks.
Raptor models are not covered, and 2023 or later F-150 models are not included. Check the year, model and trim against your truck before ordering.
Installation notes
The kit requires a wheel alignment after installation. The blocks and u-bolts change the rear lift height, so have the rear end aligned once the work is complete.
What’s included
All necessary hardware, the tapered lift blocks, the u-bolts and installation instructions.















