Select your vehicle

Pro Comp 4 Inch Rear Lift Block – 95-405F

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 4-inch rear lift block for leaf spring trucks
  • Sold in pairs
  • Universal fit, no vehicle listed
  • Part number 95-405F

Description

Overview

The Pro Comp 95-405F is a 4-inch rear lift block for leaf spring trucks, sold as a pair. The blocks are intended for the rear springs only.

A 4-inch rear block raises the axle relative to the leaf springs by the thickness of the block. A height this large changes the driveshaft angle more than a thinner block, so confirm which vehicles this set suits before fitting.

Check the driveshaft angles and the U-bolt length after installation. Before ordering, confirm that the 4-inch height suits the lift you want and the spring setup of your truck.

Key features

  • 4-inch rear lift
  • Sold in pairs
  • For rear use only

Before you buy

Lift blocks change more than ride height. Raising the axle changes the angle between the transmission and the pinion, which can cause vibration if the driveshaft joints bind. Look at the driveline length before deciding, and consider whether a different driveshaft or pinion angle correction is needed for your build.

Blocks are normally fitted with longer U-bolts, and the brake hose and shock absorbers may also need attention at the new height. Because the blocks are sold as a pair, both sides of the rear axle can be fitted together, which keeps the axle level. After installation, retighten the U-bolt nuts after the first few drives and check the joints for wear.

  • Check driveline length before fitting
  • Keep both sides of the axle matched
  • Retighten U-bolts after early drives

Specifications

Brand Pro Comp Suspension
Part number 95-405F
Position Rear
Lift 4 in
Quantity Pair

Vehicle fitment

Check fit against your vehicle’s year, model and rear suspension before ordering.

A rear lift block is sized for a specific leaf spring setup, so do not assume fit from the part name. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check the driveshaft angles after installation, and fit these at the rear only.

What’s included

A pair of 4-inch rear lift blocks.

Not included: U-bolts and other hardware.

Questions & Answers

Are the 95-405F blocks sold in pairs?

Yes. The rear blocks come as a pair, so the listed part is a set of two blocks for the rear springs rather than a single block.

What lift does the 95-405F give?

The specifications list a 4-inch lift. Check the driveshaft angles after installation to confirm the height suits your truck and driveline.

Can the 95-405F go on the front?

No. These blocks are made for the rear springs only. A riser block should never be used on the front of any vehicle, so do not fit them at the front axle or any other front component.

Should I replace the U-bolts when fitting lift blocks?

Often yes. Standard U-bolts may not reach around the axle at a higher rear position, so measure the length against the new height and confirm the thread length before installation.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon