Overview
The Power Stop Z36-1087 is a rear metallic Z36 Truck and Tow disc brake pad set for the 2006-2010 Jeep Commander (XK), 2005 Grand Cherokee (WJ) and 2006-2010 Grand Cherokee (WK).
The Z36 pads have a coefficient of friction 17 percent higher than OE pads. That extra friction suits drivers who tow trailers, haul loads or drive in the hills.
Key features
- Metallic pad for trucks and SUVs with higher gross vehicle weights
- Made for driving in the hills, hauling loads and towing trailers
- Extreme pad bite to avoid high temperature brake fade
- Coefficient of friction 17 percent higher than OE pads
- Thermal scorched, chamfered and slotted like OE
- Powdercoated backing plate
- Noise insulating shims
- Hi-Temp lubricant included
Before towing with rear pads
Rear brakes do a large share of the stopping on a loaded vehicle, and they run hot on long downhill grades. Metallic friction material tolerates that heat well, which is why it suits trucks and SUVs that carry heavier loads. Harder-biting pads also put more load on the rotors, so check the rotor surfaces when you change the pads.
Bed in new pads with a series of moderate stops before any heavy towing, so the friction layer transfers evenly to the rotor. Inspect the rear calipers for smooth piston movement and check the slide pins for corrosion. Worn pads often bring a squeal from the wear indicator, uneven thickness across the axle, or a softer pedal under load.
- Replace rear pads in pairs on the same axle
- Measure rotor thickness and runout before installing
- Lubricate slide pins with the supplied lubricant
Specifications
| Brand | Power Stop |
|---|---|
| Part number | Z36-1087 |
| UPC | 792088516091 |
| Product type | Disc brake pads |
| Position | Rear |
| Series | Z36 Truck and Tow |
| Friction material | Metallic |
| Friction coefficient | 17 percent higher than OE pads |
| Backing plate | Powdercoated |
| Caliper | Stock |
| Fit type | Direct fit |
| Pad type | Upgrade |
Vehicle fitment
The Z36-1087 fits the 2006-2010 Jeep Commander (XK), the 2005 Jeep Grand Cherokee (WJ) and the 2006-2010 Jeep Grand Cherokee (WK), in the rear position.
The WJ fits 2005 only, and WK years after 2010 are not covered by this rear pad. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Fit the pads to stock calipers using the supplied noise insulating shims and Hi-Temp lubricant. Brake work on a tow vehicle is safety-critical, so have a qualified technician check it if you are not experienced.
What’s included
Metallic pads, noise insulating shims and Hi-Temp lubricant.
Not included: Brake rotors and calipers are not part of this pad set.









