Overview
The Power Stop Z36-1066 is a Z36 Truck and Tow brake pad set built for trucks and SUVs with higher gross vehicle weights. It suits drivers who haul loads, tow trailers, or drive in hilly terrain, where the extra pad bite helps resist high temperature brake fade. No model or year is named for this part number.
Key features
- Friction coefficient 17 percent higher than OE pads
- Extra pad bite for high temperature conditions
- Thermal scorched pads
- Chamfered and slotted edges
- Powder coated backing plate
- Noise insulating shims and hi-temp lubricant
Towing brake pad considerations
Brake fade during long descents or repeated stops is a common concern for anyone towing. Pads that handle heat well help maintain pedal feel, but the rotors, fluid and caliper condition matter just as much. Worn or warped rotors can reduce the benefit of any pad, so inspect them when the pads are replaced.
Brake fluid should be fresh, since it absorbs moisture and boils at lower temperatures when hot. Bed in new pads following the normal procedure for your setup so the friction layer transfers evenly. Heavier loads also mean more frequent inspection, especially for pad thickness and any uneven wear.
- Check rotor thickness and runout at pad changes
- Replace brake fluid on a regular schedule
- Inspect hardware and shims for wear
Specifications
| Brand | Power Stop |
|---|---|
| Part number | Z36-1066 |
| UPC | 792088521903 |
| Product line | Z36 Truck and Tow |
| Friction coefficient | 17 percent higher than OE pads |
| Pad material | Friction material is not confirmed. Check the material against your application before ordering. |
| Caliper | Stock |
| Product type | Upgrade |
Vehicle fitment
No vehicle is named for the Z36-1066. It is intended for trucks and SUVs with higher gross vehicle weights. Verify your truck’s year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One Z36 pad set with hi-temp lubricant. Noise insulating shims are part of the design.









