Overview
The Power Stop K6403-36 is a front Z36 Severe-Duty Truck and Tow 1-Click brake kit for the 2013–2018 Ford F-250 Super Duty and 2013–2017 F-350 Super Duty.
It supplies slotted, cross-drilled rotors and Z36 high-friction metallic pads for the front axle of these Super Duty trucks. The kit comes without calipers. The Truck and Tow name signals the target use: heavier vehicles and loaded trips. Power Stop’s own claim is that its kits provide extra pad bite without adding noise or dust, though how this feels will depend on the vehicle and load.
Key features
- Slotted and cross-drilled rotors
- Z36 Truck and Tow high-friction metallic brake pads
- Power Stop aims the kit at heavy-duty braking and towing at maximum weight
- Direct fit
- Kit comes without calipers
Towing and heavy loads
Heavy-duty pads run hotter when a truck pulls a trailer or carries a load. High-friction metallic compounds are designed to handle that heat and keep friction steady, but they can be louder and produce more dust than everyday pads. Choosing a compound for how the truck is used matters more than chasing the strongest grip.
Brake fluid works harder under towing, because heat builds faster in the calipers and rotors. Old fluid can absorb moisture and lower its boiling point. Check the fluid condition when the front brakes are serviced, and replace it if it looks dark or has been in service a long time.
A trailer brake controller should be set up carefully once the new pads are bedded in. Test braking with and without a load in a safe area before towing on the road.
- Inspect the rotor edges for heat cracks after towing
- Let brakes cool before parking after a long downhill
- Confirm the trailer brake controller setting after pad changes
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K6403-36 |
| UPC | 792088849489 |
| Brake position | Front |
| Rotor type | Slotted and cross-drilled |
| Brake pads | Z36 Truck and Tow high-friction metallic |
| Calipers | Not included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2013–2018 Ford F-250 Super Duty and the 2013–2017 Ford F-350 Super Duty.
Super Duty trucks from 2012 and older are outside the coverage, and the 2018 F-350 is not covered. It is a front-axle kit only, so match your year, model and trim before buying.
Installation notes
It is a direct-fit front kit, so it replaces the original rotors and pads. No calipers come with it, so the truck’s existing calipers are reused. Replace both wheels of the axle together.
What’s included
Slotted and cross-drilled rotors and Z36 Truck and Tow metallic pads.
Not included: calipers.









