Overview
The Power Stop K1940 is a front and rear performance brake upgrade kit with silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads. No vehicle is attached to it, so confirm fit separately before ordering.
The kit covers both axles and includes coated rotors, no brake lines and a direct fit. A drilled rotor has holes through its friction face and a slotted rotor has grooves cut across it, and the K1940 uses both patterns. Related kits such as the K1940-36 use different pads and carry vehicle fit, so compare part numbers carefully before buying.
Key features
- Both axles are included in one kit.
- Silver zinc plated rotors, cross drilled and slotted.
- Z16 ceramic scorched pads.
- Coated rotors.
- No brake lines in the box.
Choosing a kit for both axles
Kits that cover both axles save time, but they also commit you to replacing every wheel position at once. Front and rear pads wear at different rates, so a single kit gives a consistent set of parts. Plan for four wheels in the same session, including time to bed in new pads.
Ceramic pads with silver zinc plated rotors suit everyday driving, where quiet operation and low dust matter. Coated rotors help resist rust on parts that sit outside through the winter. Drilled and slotted rotors shed water and gas, and they can wear pads faster than plain rotors.
Before the job, check brake hoses, caliper slide movement and fluid condition on both axles. Replace any worn hardware now rather than after the new parts are installed. A short test drive in a quiet area lets you judge pedal firmness and pull before normal use.
- Replace front and rear sets together
- Check caliper slides on both axles
- Test pedal firmness in a quiet area
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1940 |
| UPC | 792088530202 |
| Product type | Performance brake upgrade kit |
| Brake position | Front and rear |
| Rotor type | Slotted and cross drilled, silver zinc plated, coated |
| Brake pads | Z16 ceramic scorched brake pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Without a make, model or year, the K1940 cannot be matched to a vehicle from its part number. Match your vehicle’s year, model and trim to the part before buying.
No vehicles are listed, so none can be ruled in or out. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With the K1940 both axles are involved, and each axle’s rotors and pads are replaced together. The vehicle’s existing brake lines are kept.
What’s included
The K1940 contains silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads for the front and rear axles.
Not included: Brake lines.









