Overview
The Power Stop K1992-36 is a front Heavy Duty Truck and Tow brake kit for the 1990–2000 Chevrolet K3500, the 1990–1991 Chevrolet V3500, the 1994–1999 Dodge Ram 2500 and Ram 3500, the 1990–2000 GMC K3500 and the 1990–1991 GMC V3500. Slotted and cross-drilled rotors and Z36 high-friction metallic pads make up the kit, which has no calipers.
It is meant for braking in wet, hot or hilly conditions and when towing at maximum weight. Rotors are coated, brake lines are not included, and the fitment is direct fit. Holes through the friction face and grooves across it define the rotor patterns, and this kit uses both. The entries cover General Motors and Dodge heavy-duty trucks from the 1990s, so match the model year closely: the V3500 entries end in 1991 and the Ram entries cover 1994 through 1999. Its Z36 pads are metallic with high friction.
Key features
- Front kit for heavy-duty GM and Dodge trucks of the 1990s.
- Slotted and cross-drilled rotors.
- Z36 high-friction metallic pads.
- Six vehicle entries across Chevrolet, Dodge and GMC.
- Calipers and brake lines are not part of the kit.
Older heavy-duty trucks
Trucks from the 1990s often have years of wear in their hubs, brake lines and caliper hardware. Before fitting new rotors and pads, inspect the hubs for pitting, check that the wheel bearings are in good condition, and confirm the calipers slide freely. A new rotor on a worn hub can run out, causing pulsation that feels like a rotor problem but comes from elsewhere.
Rust is a frequent issue on older trucks, especially in areas that use road salt. Clean the mounting faces and remove any loose scale. Replace worn caliper hardware and brake hoses when they are exposed, since those parts are often replaced together with rotors and pads on older heavy-duty vehicles. Matching the front pads and rotors to the vehicle’s load rating is a good idea when towing.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1992-36 |
| UPC | 792088565389 |
| Product type | Heavy duty truck and tow brake kit without calipers |
| Brake position | Front |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the six Chevrolet, Dodge and GMC entries below, with the trims shown for each.
- 1990–2000 Chevrolet K3500 (Base, Cheyenne, LS, Scottsdale, Silverado)
- 1990–1991 Chevrolet V3500 (Cheyenne, Scottsdale, Silverado)
- 1994–1999 Dodge Ram 2500 (Base)
- 1994–1999 Dodge Ram 3500 (Base)
- 1990–2000 GMC K3500 (Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX)
- 1990–1991 GMC V3500 (Base, SLE)
Model years outside those listed, and other Dodge Ram models, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The K1992-36 is a front kit. Rotors and pads are replaced together, and the calipers and brake lines already on the truck are reused.
What’s included
The K1992-36 contains slotted and cross-drilled rotors and Z36 high-friction metallic pads for the front axle.
Not included: Calipers and brake lines.









