Overview
The Power Stop K2162 is a Z23 Evolution Sport front and rear brake kit for the 2003-2007 Jeep Liberty (KJ), with drilled and slotted rotors and carbon fiber infused ceramic pads.
The Z23 pads resist fade at much higher temperatures and use premium shims and powdercoated backing plates for quiet, rust-resistant operation. The rotors are silver zinc plated. The series suits daily driving, with drilled rotors that give the wheels a different look and reduce rotor weight. The slots clean and de-glaze the pad surface, and the holes and slots carry debris, dust, gases and water away from the pad.
Key features
- Front and rear kit for the 2003-2007 Jeep Liberty (KJ)
- Z23 carbon fiber infused ceramic pads
- Slots add pad bite and air circulation
- Drilled holes and slots give debris, dust, gases and water a path out
- Slots clean and de-glaze the pad surface
- Drilled rotors reduce rotor weight and change the look of the wheels
- Premium hardware included
Bedding in the new pads
Ceramic pads need a controlled break-in before they reach their full stopping performance. Make a series of moderate stops from moderate speed, allowing the brakes to cool between runs, so that a thin layer of friction material transfers onto the rotor face. Skipping this step can leave the pedal feeling inconsistent for the first several hundred miles of driving.
Carbon-ceramic pads generate less dust than many semi-metallic compounds, which keeps the wheels cleaner. Still, keep an eye on the rotor surface and the caliper slide pins, since dust and corrosion can build up in the same areas over time. A brief inspection at each tire rotation catches small problems early.
- Use moderate stops during the first few drives
- Let the brakes cool between bedding runs
- Keep brake dust off the pad surface during installation
- Check pad wear at every tire rotation
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K2162 |
| UPC | 792088531889 |
| Product type | Brake kit (drilled and slotted rotors with ceramic pads) |
| Series | Z23 Evolution Sport |
| Rotor type | Slotted and cross drilled, Tru-Cast technology |
| Rotor finish | Silver zinc plated, coated |
| Brake pads | Z23 carbon fiber infused ceramic |
| Hardware | Premium hardware, pin bushing kit and Hi-Temp lubricant |
| Brake position | Front and rear |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Power Stop lists K2162 for the 2003-2007 Jeep Liberty (KJ).
This kit covers the 2003-2007 Jeep Liberty (KJ) only, so 2002 models fall outside its coverage. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Hi-Temp lubricant and a pin bushing kit are supplied for the caliper hardware, and the kit is direct fit without brake lines.
What’s included
The kit contains front and rear drilled and slotted rotors, Z23 carbon fiber infused ceramic pads, premium hardware, and a pin bushing kit with Hi-Temp lubricant.
Not included: Brake lines and calipers.









