Overview
The Power Stop Evolution AR83071XPR is a set of slotted and cross-drilled front brake rotors for the 2007-2011 Dodge Nitro and the 2008-2012 Jeep Liberty (KK). The rotors are vented cast iron with 5 lugs and are coated.
Drilled holes allow maximum rotor cooling and help keep temperatures down under extreme operating conditions. Rounded slots wipe away gas or debris so the contact patch stays clean.
Slots sweep gas and debris away from the pad contact area, and the plating helps guard the visible faces against rust and corrosion. The Nitro and Liberty KK share this front rotor set, which fits owners who tow or drive hard and want a drilled and slotted face on an OE-fit rotor. Vented construction moves air through the disc, and the coating protects the rotor body from rust.
Key features
- Slotted and cross-drilled front rotors
- Vented cast iron, 5 lugs
- 2 wheel set, coated
- Drilled holes for cooling; rounded slots clear gas and debris
- Silver zinc dichromate plating to prevent rust and corrosion
- Machined and mill balanced
- Maximum run-out 0.0032 in (0.08 mm)
Signs the old rotors are worn
Front rotors take the heaviest share of braking on these trucks, so wear shows up there first. A pulsing pedal under light braking often points to uneven rotor thickness, while a grinding noise usually means the pad material is gone and metal is contacting the disc. Vented rotors also develop heat checks over time, and small surface cracks that run across the friction face are a sign that the rotor should be measured.
When a rotor is replaced, look at the caliper slide pins and the hub surface too, since a rotor that sits unevenly will wear unevenly. Fit new pads at the same time for a consistent bite. After the first stops, listen for chatter and check that the pedal stays firm.
- Measure rotor thickness against the minimum stamped on the rotor
- Look for heat checks or cracks across the friction face
- Clean rust from the hub mating surface before installation
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTAR83071XPR |
| Part type | Evolution drilled and slotted brake rotors |
| Disc material | Cast iron |
| Style | Vented |
| Position | Front |
| Number of lugs | 5 |
| Quantity | 2 wheel set |
| Coating | Coated |
| Maximum run-out | 0.0032 in (0.08 mm) |
| Maximum DTV tolerance | 0.0005 in (0.0125 mm) |
Vehicle fitment
It fits the 2007-2011 Dodge Nitro and the 2008-2012 Jeep Liberty (KK).
The 2002-2007 Jeep Liberty (KJ) is a different generation and is not covered by this front rotor set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Power Stop says each rotor is carefully machined and mill balanced and guaranteed to fit the vehicle. The set suits Liberty KK owners in 2008-2012 and Dodge Nitro owners in 2007-2011. Both rotors in the set are coated, vented cast iron, so they go on the two front hubs together. Fit new front pads with the rotors, and have a technician check pedal feel before driving.
What’s included
Two front rotors, one per side.









