Overview
The Power Stop AR8722XPR is a front slotted and cross-drilled brake rotor for Jeep Cherokee (XJ) 1990–1999, Grand Cherokee (ZJ) 1993–1998, Wrangler (YJ) 1990–1995, Wrangler (TJ) 1997–1999, the 1990–1992 Comanche and the 1990 Wagoneer (SJ). The AR8722XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
Holes and slots share the work: the holes help lower rotor temperature in extreme braking, and the slots sweep a clear contact patch between pad and rotor to reduce fade.
The AR8722XPR suits owners of 1990-1999 Cherokee XJ, ZJ, YJ, early TJ, Comanche who want a drilled and slotted look and the cooling holes Power Stop describes, in a direct-fit front rotor that arrives coated.
Key features
- Cross-drilled holes for cooling
- Rounded slots clear water, gas and dust
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Jeep front brake upkeep
Front rotors on older Jeeps work with suspension and steering parts that often show age along with the brakes. A rotor that runs out or wears unevenly can produce a pulsing pedal and steering wheel shake, so the hub, bearings and tie-rod ends are worth checking when the rotors come off.
Pads should match the rotor in thickness and condition. Glazed or glossy pad faces reduce bite, so clean or replace them during rotor service. Lubricate the caliper slide pins with proper brake grease and keep the hose connections free of leaks for steady braking on rough trails and highway driving alike.
- Inspect the rotor face for hard spots
- Replace both front rotors together
- Check the wheel bearing for play before installation
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8722XPR |
| UPC | 792088553911 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The holes keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits these vehicles: 1990–1999 Jeep Cherokee (XJ) (Base, Briarwood, Classic, Country, Laredo, Limited, Pioneer, SE, Sport); 1990–1992 Jeep Comanche (Base, Eliminator, Pioneer); 1993–1998 Jeep Grand Cherokee (ZJ) (5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi); 1990 Jeep Wagoneer (SJ) (Limited); 1997–1999 Jeep Wrangler (TJ) (SE, Sahara, Sport); 1990–1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara).
It covers Wrangler TJ models from 1997 to 1999 only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The AR8722XPR is a direct-fit replacement, so it goes on the front hubs of the listed vehicles in place of the original rotors; replace both sides of the axle together.









