Select your vehicle

Power Stop Evolution Drilled and Slotted Rear Brake Rotors – EBR871XPR

Power Stop

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rotors for 2007–2021 Dodge, Freightliner and Mercedes-Benz Sprinter vans (see list)
  • Slotted and cross drilled, Tru-Cast machined
  • Mill balanced, G3000 grade cast, zinc plated; supplied as a pair
  • Power Stop part number PSTEBR871XPR

Description

Overview

The Power Stop Evolution EBR871XPR (part number PSTEBR871XPR) is a pair of drilled and slotted brake rotors for Sprinter vans: the 2007–2021 Dodge, Freightliner and Mercedes-Benz Sprinter 1500, 2500, 3500 and 3500XD.

Power Stop machines these rotors with its Tru-Cast technology. The cross-drilled holes are said to keep rotors up to 180F cooler, and the rounded slots clear water, gas and dust from the contact patch between the pad and the rotor.

The rotors are silver zinc plated to shield against rust in normal use.

Sprinter vans were sold under the Dodge, Freightliner and Mercedes-Benz names, and the same rotor fits each badge. Check your van’s badge and model year before ordering.

Key features

  • Cross-drilled holes help keep the rotors up to 180F cooler.
  • Precision machined using Tru-Cast technology
  • Rotor run-out within 0.0015 and DTV tolerance within 0.005
  • All Evolution rotors are mill balanced
  • Rounded slots keep a clear contact patch by sweeping away water, gas and dust
  • Silver zinc plated to shield against rust during normal operation
  • Reduces fade; G3000 grade cast
  • Supplied as a pair

Sprinter van brake care

Sprinter vans often carry loads and run frequent stops, so their brakes see steady work. Cross-drilled holes help heat leave the rotor, and rounded slots clear water, gas and dust from the pad face. Both features are useful in wet weather and on loaded runs.

Replace rotors on the same axle together and fit new pads at the same time. Clean the hub face and check the caliper slide pins and parking brake while the wheels are off. Pads should be bedded in with moderate stops before the van carries a full load.

  • Check hub runout with a dial indicator before fitting
  • Torque lug nuts evenly in a star pattern
  • Flush brake fluid on a set schedule for vans used with loads

Specifications

Brand Power Stop
Part number PSTEBR871XPR
Product type Brake rotors, drilled and slotted
Disc material Cast iron (G3000 grade)
Coating Silver zinc plated
Run-out Within 0.0015
DTV tolerance Within 0.005
Quantity Pair
Fit Direct fit

Vehicle fitment

It fits the Dodge Sprinter 2500 and 3500 (2007–2009), the Freightliner Sprinter 1500 (2019–2020), 2500 (2007–2020), 3500 (2007–2021) and 3500XD (2018–2021), and the Mercedes-Benz Sprinter 1500 (2019–2021), 2500 (2010–2021), 3500 and 3500XD. All Sprinter entries are in the Base trim. Sprinter years before 2007 and vans with a different brake package are not covered. Confirm the year, model and trim against your van before ordering.

Sprinter years before 2007 and any van with a different brake package are not in the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Replace both rotors on the axle together and fit new pads.

What’s included

Two rotors, supplied as a pair.

Not included: Brake pads and mounting hardware.

Fitment

VehicleYearsTrims
Dodge Sprinter 25002007–2009Base
Dodge Sprinter 35002007–2009Base
Freightliner Sprinter 15002019–2020Base
Freightliner Sprinter 25002007–2020Base
Freightliner Sprinter 35002007–2021Base
Freightliner Sprinter 3500XD2018–2021Base
Mercedes-Benz Sprinter 15002019–2021Base
Mercedes-Benz Sprinter 25002010–2021Base
Mercedes-Benz Sprinter 35002010–2021Base
Mercedes-Benz Sprinter 3500XD2018–2021Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the EBR871XPR fit a Mercedes-Benz Sprinter 2500?

Yes. It fits the Mercedes-Benz Sprinter 2500 for 2010–2021 in Base trim, and the Dodge and Freightliner badges use the same part for their own years. Confirm the year, model and trim against your van before ordering.

What is Tru-Cast technology on the EBR871XPR?

Tru-Cast is the machining process used on these rotors, which are precision machined to tight tolerances. The rotors have run-out within 0.0015 and DTV tolerance within 0.005.

Which Sprinter years does the EBR871XPR fit?

The EBR871XPR fits from 2007 to 2021, depending on the badge. Dodge covers 2007–2009, Freightliner covers 2007–2021 and Mercedes-Benz covers 2010–2021. Check your van's badge and model year before ordering.

Do Sprinter rotors need special pads?

No special pads are required, but the pad compound should suit a drilled and slotted rotor and the van's typical load. Pads that match the rotor surface help the brakes bed in evenly and reduce noise under light braking.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon