Overview
The Power Stop AR8780XPR is a front slotted and cross-drilled brake rotor for the 2007–2018 Jeep Wrangler (JK). The cross-drilled holes are designed to help keep the rotor up to 180°F cooler, and the rounded slots clear water, gas and dust from the pad face.
This front rotor suits Wrangler JK owners who want a slotted and cross-drilled face instead of a plain disc. Confirm fit for your vehicle’s year, model and trim before ordering.
Owners look at drilled and slotted rotors when they want a surface that clears water and dust more readily than a plain disc.
Key features
- Slotted and cross-drilled front rotor
- Direct fit for the listed vehicles
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
- Mill balanced
- Looks good behind custom or factory wheels
- Tru-Cast precision machining
- Designed to reduce brake fade
- Beveled, precision-drilled holes to help hold temperatures down in extreme braking
- G3000 grade cast
Choosing slotted or drilled rotors
Slots and cross-drilled holes change how a rotor handles water, dust and heat, but they also change the surface the pad sees. Pads with a heavy compound can wear a slotted face faster, so pair the rotor with a pad matched to daily use. Cracks often start at the drilled holes after repeated hard stops, so check the face each time the pads are changed.
The rotor is a front part, so it works with the front pads, calipers and hub of the Wrangler JK. When it is replaced, the pads should be replaced on the same axle to keep braking even from side to side. Mixed sizes can cause fitment trouble, so the rotor should always be checked against the one being removed.
- Wipe the new rotor with brake cleaner before fitting
- Bed in pads with a series of moderate stops
- Check wheel bearings when vibration appears
- Keep the slots clear of packed mud after off-road use
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8780XPR |
| UPC | 792088924070 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Front |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and the Unlimited (JKU) in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
Compare the diameter, thickness, bolt pattern and weight with the rotor being replaced before ordering.
Only the JK generation (2007–2018) is listed; the TJ and the JL Wrangler are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit new pads to the same axle whenever the rotors are replaced, then bed them in with controlled stops before normal driving.
What’s included
It is a single front brake rotor, and no additional parts are included.
Not included: Pads, hardware and any brake fluid are separate items and are not part of the rotor listing.









