Overview
The Power Stop Evolution AR82188XPR is a set of drilled and slotted front brake rotors for the 2015-2020 Chevrolet Colorado and the 2015-2020 GMC Canyon. Power Stop built the set to bolt on at the OE fit and vane count.
Drilled holes allow maximum rotor cooling and help keep brake temperatures down in extreme operating conditions, while rounded slots wipe away gas and debris to keep a clear contact patch.
The Colorado and Canyon share this rotor set, so owners of either truck can use the same part number. Power Stop pairs the OE fit with a drilled and slotted face for drivers who want a performance look and feel from a stock-fit rotor.
Key features
- Front position drilled and slotted rotors
- Direct OE fit and vane count, no modifications needed
- Drilled holes for cooling, slots to sweep away gas and dust
- G3000 grade castings.
- Silver zinc plated, except hub rotor assemblies
Before you buy
Front brake rotors work with the pads, caliper and hub as one system, so a rotor change is a good moment to look at the whole front end. Pads that are glazed or unevenly worn can shorten rotor life and cause vibration, so replacing them alongside the rotors is common practice. Check that the caliper slides move freely and that the brake hose is not cracked before the new rotors go on.
Drilled and slotted faces can wear pads faster than plain rotors because the grooves change how the pad bites. Choose a pad compound suited to your driving, whether that is mostly commuting or regular trail use with a loaded bed. Watch for pulsation, squeal or a soft pedal after the first few stops, and have a technician check the system if any appear.
- Inspect rotor thickness and surface before reinstalling
- Bed in new pads gently to transfer an even layer
- Re-check lug nut torque after the first drive
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTAR82188XPR |
| Part type | Evolution drilled and slotted brake rotors |
| Position | Front |
| Plating | Silver zinc |
| Casting grade | G3000 |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2015-2020 Chevrolet Colorado and the 2015-2020 GMC Canyon.
Earlier Colorado and Canyon trucks from before 2015 are not included, and this is the front set; the rear uses different rotors. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the set matches the OE vane count, installation follows the same steps as a stock rotor swap. A technician should confirm pedal feel before the truck is driven, since brakes are a safety system.
What’s included
Two drilled and slotted rotors for the front axle.
Not included: Brake pads and hardware are not part of this set.









