Overview
The Power Stop K6271-36 is a rear 1-Click Extreme Truck and Tow brake kit for the 2012–2018 Ford F-150. It contains slotted and cross-drilled rotors and Power Stop Z36 high-friction metallic pads, and it is sold without calipers.
Power Stop designs the Z36 kit as heavy-duty braking for trucks, meant to improve braking capability in wet, hot or hilly conditions and when towing at maximum weight. The rotors are coated and the kit is a direct fit. Cross-drilled rotors have holes through the face, and slotted rotors have grooves cut across it, and the K6271-36 uses both patterns. It is aimed at F-150 owners who haul loads or tow.
Key features
- Rear-axle kit with slotted and cross-drilled rotors.
- Power Stop Z36 high-friction metallic pads are the pad type.
- Power Stop positions the Z36 series for towing and heavy-duty use.
- Rotors are coated.
- Neither calipers nor brake lines are in the box.
- One F-150 entry, covering 2012–2018, is listed.
Rear brake service on the F-150
Rear brakes do less of the stopping than front brakes, but they still need inspection when rotors and pads are replaced. Check the parking brake adjustment and the caliper guide pins during the same service, because a seized pin can wear one pad quickly. Compare the rotor hat size and bolt pattern with the old part before the wheel is removed.
A rear-axle kit is often chosen for towing or hauling, where heat builds up more often. Metallic pads handle heat well but can make more noise when cold. Cross-drilled and slotted coated rotors help shed gas and water, yet they also need regular checks for cracks and uneven thickness, especially after long grades.
- Check the parking brake adjustment after pad replacement
- Clean the caliper guide pins and lightly lubricate the slides
- Re-check lug nut torque after the first drive
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K6271-36 |
| UPC | 700007478951 |
| Product type | Truck and Tow drilled and slotted brake kit without calipers |
| Brake position | Rear |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Power Stop Z36 high-friction metallic pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
The K6271-36 fits the 2012–2018 Ford F-150 across the trims shown below, from XL and XLT up to Raptor.
- 2012–2018 Ford F-150 (FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, STX, SVT Raptor, XL, XLT)
Other Ford trucks, and F-150 model years outside 2012–2018, are not on Power Stop’s list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The K6271-36 serves the rear axle only, so front brake work needs a different kit. Since calipers and brake lines are not included, the existing ones remain on the truck while the rotors and pads are exchanged as a set.
What’s included
Slotted and cross-drilled rotors and Power Stop Z36 high-friction metallic pads for the rear axle.
Not included: Calipers and brake lines.









