Overview
The Power Stop K5412-36 is a front Heavy Duty Truck and Tow brake kit for the 2009–2011 Ford F-250 Super Duty and 2010–2011 F-350 Super Duty.
Slotted and cross-drilled rotors and Z36 high-friction metallic pads are supplied for the front axle of these Super Duty trucks. The calipers on the truck are reused. Power Stop builds its 1-Click kits as matched sets, so the rotors and pads are chosen to work together instead of being mixed from different sources. The company says its kits give more pad bite than other leading brands without added noise or dust.
Key features
- Slotted and cross-drilled rotors for use under load
- Z36 Truck and Tow high-friction metallic brake pads
- Intended for wet, hot and hilly roads and for towing at maximum weight
- Direct-fit design matched to the listed vehicles
- Kit is supplied without calipers
- Brake lines are not part of the kit
Super Duty brake maintenance
Super Duty trucks are heavy, and their front brakes carry a large share of the work during towing and hard stops. Regular inspection of the rotor surface, pad thickness and caliper function helps prevent uneven wear and pulling. Plan to check the front brakes at each oil change or tire rotation, especially if the truck regularly pulls a heavy trailer.
Replacing rotors and pads together gives a more consistent feel from the pedal. When the old calipers are reused, check the slide pins and boots for leaks, since a sticking caliper can overheat the new pads. Brake fluid should be changed on a regular schedule because moisture absorbed over time reduces its boiling point under heavy loads.
- Check pad thickness at each rotation
- Inspect calipers for sticking or leaks
- Replace fluid on a regular schedule
- Bed in new pads before towing
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K5412-36 |
| UPC | 70000689299 |
| Brake position | Front |
| Rotor type | Slotted and cross-drilled |
| Brake pads | Z36 Truck and Tow high-friction metallic |
| Rotor coating | Coated |
| Calipers | Not included |
| Brake lines | Not included |
| Fit type | Direct fit |
Vehicle fitment
The kit fits the front axle of the 2009–2011 Ford F-250 Super Duty and the 2010–2011 Ford F-350 Super Duty.
Later Super Duty generations, such as 2013 and newer, are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a direct-fit pad and rotor kit, so it replaces the factory rotors and pads without modification. It contains no calipers, and the existing calipers stay on the vehicle. Change the rotors and pads on both wheels of an axle together so braking stays even side to side.
What’s included
Slotted and cross-drilled rotors and Z36 Truck and Tow metallic brake pads.
Not included: calipers and brake lines.









