Overview
The Crown Automotive Dana 35 Rear Differential Cover (part 83505125) is a natural steel rear differential cover for Dana 35 axles, supplied with a fill plug.
Crown Automotive positions it as a replacement cover. Its fitment entries cover the 1984 to 1990 Jeep Cherokee (XJ), the 1986 to 1990 Jeep Comanche and the 1987 to 1995 Jeep Wrangler (YJ).
Key features
- Steel cover in a natural finish
- Fill plug included
- Standard oil capacity
- Replacement for a Dana 35 rear axle
Gear oil and axle service
A rear differential cover is part of the housing that holds gear oil, and it is removed whenever the axle is serviced or the gasket is replaced. Clean both the cover and the housing face thoroughly, since debris on a sealing surface can cause leaks. Use a gasket or sealant suited to the cover and the oil, and check that the fill plug is seated firmly.
Rear covers often show seepage first at the gasket, so inspect the area after a drive and look for drips on the housing. Fill to the level marked on the axle, then recheck after the first few trips. Keep the old cover until the new one is confirmed to fit the housing, since a mismatch is easiest to catch before oil goes in.
- Clean the sealing faces
- Use the gasket or sealant suited to the oil
- Check the fill level after the first trips
- Look for seepage at the gasket
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 83505125 |
| UPC | 848399026245 |
| Material | Steel |
| Finish | Natural |
| Axle location | Rear |
| Axle type | Dana 35 |
| Oil capacity | Standard |
| Included | Steel cover and fill plug |
Vehicle fitment
The fitment entries name the 1984 to 1990 Jeep Cherokee (XJ), the 1986 to 1990 Jeep Comanche and the 1987 to 1995 Jeep Wrangler (YJ).
The Cherokee XJ entries stop at 1990, so 1991 to 2001 XJ models are not on the list, and Wrangler TJ models are not included either. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A steel rear cover and a fill plug.
Not included: Gear oil.









