Overview
The Poison Spyder Bombshell differential cover for Dana 44 axles, part number PSC42-11-044-PC, is a black powder-coated cover cast from ductile nodular iron. It is made as a differential cover for trail use on Dana 44 front and rear axles.
Stock covers are stamped sheet metal, and a moderate tap from a rock can push one in against the ring gear. The Bombshell is designed to protect the gears, locker and carrier bearings, and the bolt heads, from those hits. A recessed design protects the cover bolt heads, and the ramp profile helps the Jeep slide over obstacles. The thick cover also resists the peel-back that happens when a rock lifts the lip of a stamped cover and lets gear oil drain.
Key features
- Cast from highly ductile nodular iron, the material used for drag racing differential housings
- Recesses protect the cover bolt heads from trail damage
- Ramped profile slides over rocks and logs
- Thick cross-section, up to 1 inch around the bolt ring where rocks make contact most often
- Thickness from 7/16 inch to 1/2 inch at the outermost surface
- Black powder coating for a durable finish
- Protects the gears, locker and carrier bearings from rock damage
Differential protection on the trail
A differential cover is one of the first parts a rock can reach on an articulating axle. A stamped cover can dent inward, lift at the lip and let gear oil drain, which can starve the gears of lubricant. A thicker cast cover resists that failure, and the cover’s shape determines how it meets rocks and logs.
Cover upgrades are often paired with a fluid check, since fresh oil keeps the gears well lubricated under hard use. Check the cover, the bolts and the drain plug after each trail trip. Look for fresh oil stains around the bolt ring, dents on the sides and bent bolts, which indicate contact that should be inspected.
- Check the bolt ring for oil seepage
- Look for cracks around the bolt pockets
- Confirm the gasket type before installing
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | PSC42-11-044-PC |
| Axle type | Dana 44 |
| Axle location | Front and rear |
| Popular axle manufacturer | Dana |
| Material | Cast ductile nodular iron. |
| Thickness | 7/16 inch to 1/2 inch at the outer surface; up to 1 inch around the bolt ring |
| Finish | Black powder coat |
| Oil capacity | Extra capacity |
Vehicle fitment
The cover is made for Dana 44 axles, which identifies the axle rather than a vehicle. Confirm your axle is a Dana 44 before ordering, and check the vehicle model and years against your own axle.
Other Dana axle sizes are not covered by this cover. Confirm your axle’s specifications before ordering.
What’s included
Check the package contents, including gasket, bolts and fill plug, against your installation before starting.















