Overview
The Mag-Hytec AAM 10.5 Inch High Capacity Cover (part AA14-10.5) is a finned aluminum rear differential cover for AAM 10.5 inch 14 bolt axles, and Mag-Hytec names 2003 to 2010 Dodge 2500 trucks for it.
Mag-Hytec builds these covers for heavy-duty recreational and service use, with a finned aircraft aluminum housing to aid cooling. The cover holds 3 extra quarts, or 6 quarts total, and stands 3 3/4 inches overall.
The 3 extra quarts make this a useful cover for a truck that tows or carries heavy loads, since the added volume gives the gear oil more room to shed heat. The finned housing does the same job from the outside. Confirm the year and model of your truck before you order, because the stated years start in 2003.
Key features
- Finned aircraft aluminum housing for cooling
- Holds 3 extra quarts, 6 total
- Overall height of 3 3/4 inches
- Dipstick with a magnetic insert
- Routine maintenance without removing the cover
- Black powder coat
Towing and oil temperature
Rear axle oil runs hotter when a truck tows, climbs grades or carries heavy loads, and that heat is what breaks down gear oil over time. A larger capacity cover gives the oil more volume to cool, so the lubricant lasts longer under those conditions. The finned housing helps move heat from the cover to the air.
Oil level matters as much as capacity. A low level exposes gears and bearings to heat, while an overfilled axle can leak past the seals. Check the level with the dipstick after the axle has settled, and keep an eye on any seepage around the cover edge.
Changing the oil on a regular schedule matters more on a working truck than a light-duty one.
- Check the oil level at each service.
- Watch for seepage around the cover edge.
- Change the oil more often under heavy towing.
Specifications
| Brand | Mag-Hytec |
|---|---|
| Part number | AA14-10.5 |
| UPC | 70000407219 |
| Material | Finned aircraft aluminum |
| Finish | Black powder coat |
| Axle compatibility | AAM 10.5 inch 14 bolt rear |
| Oil capacity | 6 quarts total (3 extra) |
| Overall height | 3 3/4 inches |
| Dipstick | Magnetic insert |
Vehicle fitment
It fits 2003 to 2010 Dodge 2500 rear axles, which is the Ram 2500 model line for those years.
The stated years start in 2003, so 1994 to 2002 Ram 2500 trucks are not covered by that statement. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lift and support the truck securely before any work under the rear axle, and confirm the O-ring seating before you fill it.
What’s included
The cover, its magnetic-insert dipstick, a magnetic drain plug, O-rings and 303 stainless steel hardware.
Not included: Gear oil.









