Overview
The Dana Spicer 10024090 is a nodular iron differential cover, part number 10024090, made for the Dana 60 rear axle. It is built for off-road use.
The cover is made from high-strength nodular iron with a natural finish. Dana Spicer says its diff covers are built for demanding environments and urges owners to choose genuine Spicer parts over knock-offs.
Key features
- High-strength nodular iron construction
- Designed for demanding off-road environments
- Extra oil capacity
- Natural finish
- Made for the Dana 60 rear axle
Dana 60 cover care
The Dana 60 is a heavy axle, and its cover takes a lot of stress from rock strikes and torque loads. A nodular iron cover resists impact well, though a hard hit can still crack the flange or distort the sealing face. Look over the cover after each rough trip, paying attention to the bolt holes, the edge of the cover and the area near the fill plug.
When choosing a cover, the axle housing matters more than the finish. The natural finish will show surface rust over time, so a light coat of protectant can help on exposed parts. Extra oil capacity makes a difference when you run larger tires or tow, because more gear oil runs cooler under load. Pair the cover with a fresh gasket and check the drain and fill plugs as well.
- Check flange edges after rough trails
- Inspect bolt holes for stripped threads
- Refill gear oil after the cover is installed
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 10024090 |
| UPC | 700007803531 |
| Material | Nodular iron |
| Finish | Natural |
| Oil capacity | Extra capacity |
| Axle location | Rear |
| Axle type | Dana 60 |
| Popular axle manufacturer | Dana |
Vehicle fitment
It is made for the Dana 60 rear axle. Match the year, model and trim to your vehicle before you order.
The only axle type named is Dana 60, so confirm your housing is a Dana 60 first. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Review the included parts against your installation plan before you begin.









