Overview
The Poison Spyder Brawler Mid front bumper with D-ring mounts, part number 17-63-010-D, is a bare steel mid-width high clearance bumper for the 2007–2016 Jeep Wrangler JK. Its ends reach roughly half the tire width, wider than the Brawler Lite, which adds brush protection at the grille corners.
Recessed fog lamp buckets of CNC laser cut tubing take the factory fog lamps, and the bumper accepts most Warn winches. D-ring mounts are included, modeled on the high clearance tabs of the BFH series.
The recess and all-steel buckets help protect the factory fog lamps from rocks. The winch sits in a slight depression on top of the bumper, and CNC laser cut plate steel gussets inside the shell sit directly beneath it for strength.
The D-ring tabs are modeled after the high clearance tabs designed for the BFH series bumpers and are angled for maximum approach angle.
The bumper is a mid-width, high clearance design that combines off-road performance with full features, fabricated from CNC laser-cut and precision brake-formed 3/16 inch plate steel.
Key features
- D-ring mounts for 3/4″ recovery shackles
- Recessed all-steel fog lamp buckets
- Designed for most Warn winches and Warn-pattern winches
- Gusseting under the winch
- Winch Fairlead Mount sold separately
- Bare steel
D-ring mounts and recovery gear
D-ring mounts are the connection point for recovery, so they take the full force of a pull. Use shackles rated for the load and keep the recovery line in line with the mount to avoid side loading the tab. Before and after each recovery, look over the tabs, welds and bolts, since a single hard pull can start a crack that grows with each use.
Mounts that have been overloaded often show bending, cracked welds or elongated bolt holes. Paint that flakes around a mount is also a sign that the metal has moved. Keep the pins clean and lightly lubricated so that shackles seat correctly and the mount is not forced into a bad angle during a recovery.
- Use shackles rated for the load
- Inspect D-ring tabs for cracks after each recovery
- Check the mounting bolts after a recovery
- Keep D-ring pins clean and lubricated
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-63-010-D |
| UPC | 614901727395 |
| Product type | Front bumper with D-ring mounts |
| Position | Front |
| Material | Steel, 3/16 inch plate |
| Finish | Bare, to be painted or powder coated before installation |
| Width | Mid |
| D-ring mounts | Included, 1 inch thick steel billet, for 3/4 inch recovery shackles |
| Body styles | 2-door and 4-door |
Vehicle fitment
It fits the 2007–2016 Jeep Wrangler (JK).
It is not intended for the 2017–2018 JK years or the TJ, LJ and JL Wranglers. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Paint or powder coat the bare steel before final installation. Add the Winch Fairlead Mount separately if you run a winch.
What’s included
- Brawler Mid front bumper
- D-ring mounts
- Recessed fog lamp buckets
Not included: Winch Fairlead Mount, winch, recovery shackles and any coating.












