Overview
It is a black powder coated Brawler Lite front bumper with shackle tabs and a Brawler Bar, for the 2007–2016 Jeep Wrangler JK. It is a grille-width, high clearance design made from 3/16 inch plate steel.
The Recovery Shackle Tabs are modeled after the high clearance tabs on the BFH series, angled for maximum approach angle, CNC machined from 1″ thick steel billet and made for 3/4″ recovery shackles. Selecting this option gets a pair welded to the bumper.
The Brawler Bar is a low-profile stinger that protects the winch, grille and radiator area. Warn PowerPlant winches do not fit directly over the DOM tube gussets, though fitting one may take some minor modifications by the installer.
The faceted design of the Brawler Lite is meant to provide maximum ground clearance and approach angle possible without frame modifications, and the factory crash bar may stay or go.
Key features
- Black powder coat finish
- Brawler Bar of 1-3/4″ diameter .120 wall DOM tubing
- Pair of shackle tabs welded to the bumper
- Tabs from 1″ thick steel billet, for 3/4″ shackles
- Integrated winch mount
- Recessed buckets for the factory fog lamps
Shackles and recovery gear
Recovery tabs carry load differently from a winch. A shackle pulls on the tab at an angle, so the pin should be fully seated and the shackle should line up with the tab’s pivot. Replace any shackle that shows bent bows or worn pin threads before a recovery.
Keep the tabs and their welds in view during trail checks. Look for cracked paint around the weld, which can show early stress, and retighten any bolts that hold the bumper to the frame. Bare recovery gear rusts quickly, so a light grease on the pins helps.
Match the rope or cable rating to the winch and store the rope dry to prevent mildew. Keep wiring and hoses clear of the winch path when the line is under load.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-59-010DBP1 |
| UPC | 614901751574 |
| Product type | Front bumper with shackle tabs and Brawler Bar |
| Position | Front |
| Material | Steel, 3/16 inch plate |
| Finish | Black powder coat |
| Width | Mid-width |
| Brawler Bar tubing | 1-3/4 inch diameter, .120 wall DOM |
| Shackle tabs | 1 inch thick steel billet, for 3/4 inch recovery shackles |
| Winch mount | Integrated |
| Body styles | 2-door and 4-door |
Vehicle fitment
It is a front bumper for the 2007–2016 Jeep Wrangler (JK), in 2-door and 4-door versions.
It is not made for the TJ, LJ or JL Wranglers, or the 2017–2018 JK years. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Unlike the BFH series, the Brawler Lite mounts without cutting or altering the frame rails. The factory crash bar can be kept or removed.
What’s included
- Brawler Lite front bumper
- Brawler Bar
- Pair of recovery shackle tabs, welded on
Not included: Winch, recovery shackles and the Brawler Lite Skid Plate.


















