Overview
The Omix-Ada OAI17467.02 (part number 17467.02) is a pair of connecting rod bearings for 134 4-cylinder engines, in .010 oversized size. Oversize bearings suit a crankshaft whose journals have been machined to match.
It fits Jeep and Willys vehicles from 1941 to 1971, including CJ, DJ, FC, Jeepster, Panel, Sedan Delivery, Truck and MB models.
Key features
- .010 oversized connecting rod bearings
- Packaged as a pair
- For 134 4-cylinder engines
- Built to original specifications, with a limited 5-year warranty
Bearing wear and oil
Connecting rod bearings carry the load between the rod and the crankshaft journal, so their condition affects oil pressure and engine noise. Wear usually shows up as a knock that changes with engine load, a drop in oil pressure at idle, or fine metal flakes on the oil filter. A bearing that has spun or overheated can damage the journal, which is why condition checks matter before reassembly.
Clean oil and a fresh filter protect new bearings during break-in. Keep each bearing half paired with its cap and rod, and lubricate the surfaces with clean assembly oil before tightening. Many engines are rebuilt with a new oil pump and a clean pan at the same time, since debris from the old bearings can collect there.
- Look for copper or bright shine on bearing surfaces
- Inspect the crankshaft journals for scoring
- Keep bearing halves paired with their caps
- Change the oil and filter after the first run
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17467.02 (Omix-Ada OAI17467.02) |
| UPC | 804314068264 |
| Engine | 134 4-cylinder |
| Size | .010 oversized |
| Quantity | Pair |
| Warranty | Limited 5-year warranty |
Vehicle fitment
It fits 1959–1960 CJ3 and CJ5, 1968–1971 CJ5 and CJ6, 1967–1971 DJ5, 1968 DJ6, 1957–1958 F4, 1958–1966 FC150, 1964–1966 FC170, 1967–1971 Jeepster and several Willys models from 1941 to 1958.
Models outside this list, including Cherokee and Wrangler vehicles from later years, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bearing fit depends on journal diameter and oil clearance, so measure the crankshaft and bearing clearance before installing. Oversize bearings only fit a crankshaft machined to the matching size, so confirm that size before assembly.
What’s included
A pair of connecting rod bearings, .010 oversized.
Not included: the crankshaft, connecting rods and main bearings.














