Overview
The Crown Automotive J0641282 is a 31-tooth crankshaft gear for the F-134 Hurricane engine. It replaces a worn or damaged original crankshaft gear and fits Jeep and Willys vehicles from 1941 to 1971.
It fits CJ3, CJ5, CJ5A, CJ6, CJ6A and several Willys CJ and MB models, the early Jeep and Willys vehicles this part is made for.
Key features
- 31-tooth crankshaft gear
- Designed for the F-134 Hurricane engine
- Crown Automotive part number J0641282, UPC 848399052305
- Fitment covers early Jeep CJ and Willys models, 1941 to 1971
Timing gear wear and replacement
The crankshaft gear drives the timing chain or gear set that keeps the valves in step with the pistons. Wear shows up as a rattle from the front of the engine, a loss of power, or hard starting when the timing has slipped. Before replacement, inspect the teeth on both the crankshaft and camshaft gears for hooking, chipping or polished flanks, since a worn gear can damage a new one quickly.
Gear replacement is usually done as a set, so check the camshaft gear and any chain at the same time. Keys and keyways should be sound, and the gear must be pressed fully onto the crankshaft before the timing marks are aligned. Timing sets on older engines are simple, but a slipped setting can still bend valves, so confirm the marks are set correctly before closing the cover.
- Check the crankshaft key and keyway
- Replace the timing chain if it has stretched
- Verify timing marks before sealing the cover
- Replace the front cover seal during the job
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0641282 |
| UPC | 848399052305 |
| Engine | F-134 Hurricane |
| Teeth | 31 tooth |
Vehicle fitment
Crown Automotive’s list covers 1959–1960 CJ3, 1959–1971 CJ5 and CJ6, 1966–1968 CJ5A and CJ6A, 1946–1949 Willys CJ-2, 1949–1958 Willys CJ-3, 1955–1958 Willys CJ-5, 1956–1958 Willys CJ-6 and 1941–1942 Willys MB models.
Jeep models from 1972 onward, including Cherokee and Wrangler, are not covered, and the CJ7 is not covered either. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Crankshaft gear replacement usually means removing the front timing cover and pulling the old gear with a gear puller, then pressing the new gear onto the crankshaft. That is a job for an engine shop with those tools.
What’s included
One crankshaft gear.
Not included: the timing chain, the cover and the installation tools.









