Overview
The Hellwig 7738 is a rear sway bar for the 2014–2016 Dodge Ram 2500 with rear coil springs, sized to replace the factory rear bar. A sway bar, also called an anti-roll bar, limits body roll when the truck turns or moves over uneven ground. Hellwig designed this 1 1/8 inch bar to work alongside the factory front sway bar, which helps control sway when hauling heavy loads, pulling a camper or towing.
The Hellwig 7738 is for 2WD and 4WD Ram 2500 trucks with coil rear springs. It is made from heat-treated 4140 chromoly solid steel with a powdercoat finish for corrosion resistance. The bar carries a lifetime guarantee from Hellwig.
Key features
- Large 1 1/8 inch rear bar for improved sway control
- Designed to work with the factory front sway bar for heavy hauling and towing
- No drilling required for installation
- Heat-treated 4140 chromoly solid steel bar
- Powdercoated for corrosion resistance
- Lifetime guarantee from Hellwig
Sway bar and suspension balance
A rear sway bar works with the rest of the suspension, so its effect depends on the front bar, the springs and the load the truck carries. On a Ram 2500 with rear coil springs, a stiffer rear bar can reduce body roll when the truck is loaded, but it also shifts how the rear axle responds to bumps. Plan to inspect the front bar and the rear mounts at the same time, since they share the job of controlling roll.
Sway bar links and bushings wear over time, and worn parts can make the setup feel loose even when the bar itself is sound. Replacing links and bushings during installation keeps the behavior consistent. Lift and support the truck safely before any inspection, and check that the bar moves freely through its normal range without binding.
- Check end links for play or cracks
- Inspect rubber bushings for tearing
- Look for bent brackets after rough use
- Re-check hardware after the first drives
Specifications
| Brand | Hellwig |
|---|---|
| Part number | 7738 |
| UPC | 745662077389 |
| Position | Rear |
| Fitment type | Direct fit |
| Bar diameter | 1 1/8 inch |
| Material | Heat-treated 4140 chromoly solid steel |
| Finish | Powdercoated |
| Warranty | Lifetime guarantee |
Vehicle fitment
It fits 2014–2016 Ram 2500 trucks in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman trims. It is a direct fit for the rear position on trucks with rear coil springs.
Fit is limited to 2014–2016 Ram 2500 trucks with rear coil springs. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a bolt-on upgrade with no drilling required. It is designed to work with the factory front sway bar, so the front bar is part of the intended setup. Lift and support the truck on stands rated for its weight before working underneath it.
What’s included
Compare the package contents with your installation plan before starting work.
Not included: the factory front sway bar, which the rear bar is designed to work alongside.









