Select your vehicle

G2 Dana 44 4.09 O.E.M. Ratio Ring and Pinion – 1-2033-409

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • G2 Dana 44 O.E.M. 4.09 ratio ring and pinion, part number 1-2033-409
  • Part of G2’s O.E.M. series, made under contract with original equipment manufacturers
  • Fits Dana 44 front or rear axle positions

Description

Overview

The G2 Dana 44 4.09 O.E.M. Ratio Ring and Pinion, part number 1-2033-409, is a 4.09-ratio gear set from G2’s O.E.M. series. It fits Dana 44 front or rear axles.

The O.E.M. series is designed to run cooler and quieter than normal aftermarket gears. G2 builds these gears under contract with original equipment manufacturers.

Key features

  • 4.09 gear ratio
  • O.E.M. series gears from G2.
  • Front or rear axle location
  • Dana 44 axle type

Ratio choice and setup

A 4.09 ratio is a common middle step, giving a stronger launch than a lower ratio while keeping highway speed reasonable for many drivers. The right ratio depends on tire size, vehicle weight, and how the vehicle is used most.

Changing ratio changes engine speed at every road speed, so the speedometer and the transmission’s shift points will feel different. Tire size can offset some of the change, which is why many owners pick tires and gears together. Check the ratio of the current gears before buying so the step is what you intend.

Gear sets are often replaced with new carrier bearings, pinion bearings, and a pinion seal, since those parts were worn to the old pattern. After the break-in period, look for fine metal in the gear oil and listen for whine that changes with load.

Specifications

Brand G2 Axle and Gear
Part number 1-2033-409
UPC 631410092974
Axle type Dana 44
Axle location Front or rear
Gear ratio 4.09
Series O.E.M.

Vehicle fitment

The set covers Dana 44 front and rear axles rather than one vehicle, so match the axle housing and current ratio before ordering.

Installation notes

A ratio change of this kind should be set up by a shop that works on ring and pinions, with the pinion depth and preload checked.

SKU: G/21-2033-409 Categories: ,

Specification

Shipping weight 6.00 lbs
Package dimensions 12.00 × 11.00 × 5.50 in
brands

Questions & Answers

Is the 1-2033-409 for the front or rear axle?

It fits either a Dana 44 front or rear axle. Confirm which axle you are replacing before installing, since the O.E.M. series fits both positions at the same ratio.

What is the O.E.M. series on the 409 set?

It is made under contract with original equipment manufacturers and is designed to run cooler and quieter than typical aftermarket gears. Noise depends on the axle, carrier, and setup.

Does the 1-2033-409 need a specific carrier?

Confirm the carrier rating against your current carrier before installing, since the mesh and preload depend on the match. A shop can check both during setup.

Will a 4.09 ratio change speedometer readings?

Yes, a different ratio changes how fast the speedometer and engine turn at a given road speed. Recalibrating the speedometer or using a gauge can correct the reading if needed.

Should the carrier be checked when new gears go in?

Yes. Check the carrier bearings, shims or preload spacers, and the case for cracks or wear. Replacing worn parts while the carrier is open keeps the new mesh stable.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon