Overview
The G2 Axle and Gear 97-2031-003 is a chromoly front inner axle shaft for the Dana 30 in the 1997–2006 Jeep Wrangler TJ. It is the passenger-side shaft, with 27 splines, and it accepts a 5-760X U-joint.
The shaft is machined to accept full circle clips. G2 catalogs the axle as a Dana 30 Reverse or Dana 30 TJ, and says its shafts are forged from high grade alloy steel and heat treated beyond OEM specifications.
The 97-2031-003 is a front inner shaft, and the chromoly material, 27 splines and 5-760X U-joint are its main identifiers. G2 Axle and Gear catalogs it for the Dana 30 TJ and says its shafts are heat treated to exceed OEM specifications. It goes on the passenger side, and it is machined for full circle clips.
Key features
- Chromoly inner axle shaft for the Dana 30
- 27 splines
- Accepts a 5-760X U-joint
- Machined for full circle clips
- Passenger-side inner shaft
- Front axle
Inner and outer shafts
A Dana 30 front axle uses an inner shaft that connects to the differential and an outer shaft that runs to the hub. This shaft is the inner half, so it has to match the outer shaft and the U-joint. Check that the spline count and joint type are correct for the axle before removing the old shaft.
The inner shaft carries drive torque under load, and the joint absorbs the angle change as the suspension moves. Look at the 5-760X U-joint for play, rust or dry bearings, and replace it when worn. Keep the axle boots and seals in good condition to protect the shaft and joint.
- Confirm the inner and outer pair match
- Inspect the U-joint before reuse
- Check the axle seals and boots
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2031-003 |
| UPC | 631410097009 |
| Product type | Replacement axle shaft |
| Axle type | Dana 30 Reverse / Dana 30 TJ |
| Axle location | Front |
| Shaft position | Passenger Side Inner |
| Spline count | 27 |
| Material | Chromoly |
| U-joint | 5-760X |
| Axle end | Machined for full circle clips |
| Stated application | 87-06 Jeep XJ/YJ/TJ w/5-760X U-Joint |
Vehicle fitment
It fits the 1997–2006 Jeep Wrangler (TJ). For an XJ or YJ, confirm fit for your vehicle’s year, model and trim before ordering.
G2’s text says 87-06 XJ/YJ/TJ with the 5-760X U-joint, but the vehicle list names only the TJ. Confirm an XJ or YJ with G2. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- The U-joint must be the 5-760X type, and the axle ends take full circle clips.
- This is the inner shaft only, so match the 27 splines to your axle.
What’s included
One passenger-side inner axle shaft (97-2031-003).
Not included: the outer shaft, U-joint and clips for the 97-2031-003.






