Overview
The G2 Axle and Gear 2-2059-488 is a 4.88 ratio ring and pinion for the Toyota 8.2 Inch axle. The pinion turns 4.88 times for each full turn of the ring gear, a numerically high ratio that multiplies torque at the wheels and suits larger tires.
The Performance Ring and Pinion line is built for oversized tires and high-performance engines, with current materials and manufacturing. Confirm the axle location, housing and vehicle before ordering.
Key features
- 4.88 gear ratio for the Toyota 8.2 Inch axle
- Ring gear and pinion supplied as one set
- Designed for oversized tires and high-performance engines.
- Built for oversized tires and high-performance engines, using current materials and manufacturing.
Before you buy
A 4.88 ratio is numerically high, so the pinion turns fewer times per wheel revolution than a taller gear would. That favors low-speed pulling and quick response with larger tires, but engine speed at highway cruise goes up. Choose the ratio around how the vehicle is used, not only around the tires on the rig today.
Ring and pinion sets are cut as a matched pair, and they interact with the carrier bearings, pinion depth and backlash. When the gears are replaced, the bearings, seals and gear oil are commonly renewed as well. Measure the axle housing and confirm the carrier fits before the gears are ordered.
- Measure ring gear diameter before ordering
- Plan on new carrier bearings with new gears
- Check axle seals while the cover is off
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2059-488 |
| UPC | 631410131017 |
| Axle type | Toyota 8.2 Inch |
| Gear ratio | 4.88 |
Vehicle fitment
Confirm fit for your Toyota 8.2 inch axle before ordering. Measure the ring gear and check whether the housing sits at the front or rear.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Setting pinion depth, backlash and carrier preload on a 8.2 inch set is specialist work, so most installers use a gear shop. Expect a break-in period before loaded use.
What’s included
One 4.88 ring and pinion set for the Toyota 8.2 Inch axle, part number 2-2059-488.
Not included: Carrier bearings, shims and installation hardware are not part of this 4.88 set. Check the package contents against your installation before starting.









