Overview
The G2 Axle and Gear 2-2025-331 is a 3.31 ratio ring and pinion for the AMC Model 20 axle. The pinion turns 3.31 times for each ring gear revolution, a numerically lower gear that keeps engine speed down at highway speed and keeps cruising rpm down.
The set fits the AMC 20 in rear and front locations. The Performance range suits oversized tires and high-performance engines. Vehicle models and years are not identified, so confirm the Model 20 housing and its location before ordering.
Key features
- 3.31 gear ratio for the AMC Model 20 axle
- Fits rear and front axle locations.
- Ring gear and pinion sold as one set
- Made for oversized tires and high-performance engines.
- Made with current materials and methods.
Cruising comfort and trade-offs
A 3.31 ratio is a numerically lower gear, so engine speed stays down at highway speed. That tends to mean quieter cruising and better fuel use on long runs, especially with a stock tire size. The trade-off is less pull from a stop and when climbing, so this setup suits street and light-duty use more than heavy towing.
Model 20 axles are older units, so inspect the housing, axle shafts and bearings before a gear swap. Worn bearings or a cracked housing can ruin new teeth quickly. Keep the carrier clean and check backlash after installation. Gear swaps are a good time to renew seals as well.
- Check housing condition before ordering
- Renew pinion and carrier bearings with the gears
- Recheck backlash after the first few drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2025-331 |
| UPC | 631410093667 |
| Axle type | AMC 20 |
| Axle location | Rear or front |
| Gear ratio | 3.31 |
| Axle manufacturer | AMC |
Vehicle fitment
Fitment is not tied to specific vehicles. The set fits the AMC Model 20 axle in rear or front positions, so verify the axle housing on your vehicle before ordering. Confirm the axle type before the gears are bought.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tooth contact and backlash on a Model 20 set are set with measurement tools, so a gear shop is the usual installer. Break the set in gradually once it is running.
What’s included
One 3.31 ring and pinion set for the AMC Model 20 axle, part number 2-2025-331.
Not included: Carrier bearings, shims and hardware are outside this kit and may need separate purchase.
















