Overview
The G2 Dana 44 4.89 O.E.M. Ratio Ring and Pinion, part number 1-2033-489, is a 4.89-ratio gear set for Dana 44 front or rear axles. It is from G2’s O.E.M. series.
The O.E.M. series gears are built to run cooler and quieter than typical aftermarket gears. They are made under contract with original equipment manufacturers and match the gear design that came in trucks from the factory.
Key features
- 4.89 gear ratio
- Part of G2’s O.E.M. series.
- Front or rear axle location
Planning a gear change
Moving to a 4.89 ratio changes how the axle turns at a given road speed. A ratio this low is often chosen for highway driving, while a taller tire or a strong engine may call for a different setup. Before buying, measure your current tire diameter and review your transmission and transfer case gearing, since both affect how the new ratio feels.
Ring and pinion gears are usually replaced as a matched pair along with pinion bearings and crush sleeve or shim work, so plan for setup time as well as parts. While the cover is off, inspect carrier bearings and axle seals and look for chipped teeth or metal debris in the old fluid. Use the gear oil type your axle requires after the new set is broken in.
- Replace pinion bearings with the new gear set
- Check carrier bearings for play or noise
- Inspect axle seals while the cover is off
- Refill with fresh gear oil after break-in
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2033-489 |
| UPC | 631410093001 |
| Axle type | Dana 44 |
| Axle location | Front or rear |
| Gear ratio | 4.89 |
| Series | O.E.M. |
Vehicle fitment
It fits Dana 44 front or rear axles rather than one specific vehicle. Confirm the axle housing and ratio before installing.
Installation notes
A 4.89 set calls for a shop with ring and pinion tools to check backlash and pinion depth before the axle is returned to service.















