Overview
The G2 Axle and Gear 2-2046-538L is a 5.38 ratio ring and pinion for the rear Ford 10.25 Inch axle. The pinion turns 5.38 times for each full turn of the ring gear, a steep ratio that multiplies torque at the wheels and favors acceleration and low-speed work.
This long version is built for the rear Ford 10.25 Inch or 10.5 Inch axle types and for oversized tires and high-performance engines. Measure the ring gear and confirm the housing before buying.
Key features
- 5.38 gear ratio for the Ford 10.25 Inch rear axle
- Rear axle location
- Long version.
- Designed for oversized tires and high-performance engines.
- Built with current manufacturing methods and materials.
Steep ratios and towing
A steep ratio multiplies engine torque at the wheels, which helps with heavy pulling, steep grades and larger tires. The cost is higher engine speed at highway cruise, along with more heat and load in the axle. Drivers who tow often should plan around that heat, including regular fluid checks.
Matching a steep set to the rest of the drivetrain takes some thought. The transmission gearing, tire size and final drive all work as a system. Many owners check the rear end temperature on long hauls and watch for noise. Keep the old carrier parts in mind too, since worn bearings can make a new set run rough.
- Gear oil level and type
- Axle temperature on long grades
- Noise changes under load
- Carrier bearing condition
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2046-538L |
| UPC | 631410094503 |
| Axle type | Ford 10.25 Inches or Ford 10.5 Inches |
| Axle location | Rear |
| Version | Long (per title) |
| Gear ratio | 5.38 |
| Axle manufacturer | Ford |
Vehicle fitment
This 5.38 long set is made for the rear Ford 10.25 Inch or 10.5 Inch axle. Confirm the ring gear diameter and carrier on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 5.38 set needs careful tooth contact and carrier preload, so a gear shop with setup tools is the practical choice. Plan on a break-in period before towing.
What’s included
One 5.38 long ring and pinion set for the rear Ford 10.25 Inch axle, part number 2-2046-538L.
Not included: Carrier bearings and shims are not part of the 5.38 long set.
















