Overview
The G2 Axle and Gear 2-2015-323 is a 3.23 ratio ring and pinion for GM 10 Bolt rear axles. In this ratio the pinion turns 3.23 times for each full ring gear revolution.
This set covers the 7.5 inch and 7.625 inch ring gear versions of the 10 Bolt, so match the ring gear diameter on your housing. It is built for oversized tires and high-performance engines with current materials and processes.
Key features
- 3.23 gear ratio for the GM 10 Bolt rear axle
- Covers 7.5 inch and 7.625 inch ring gear housings.
- Ring gear and pinion sold as a matched set
- It is designed for oversized tires and high-performance engines.
- Rear axle location
Tooth contact and break-in
Tooth contact is the way the ring gear and pinion teeth meet under load, and it is set by moving the pinion depth and carrier shims. A pattern that sits too close to the toe or the heel causes noise and early wear. Setting it on a 10 Bolt takes measurement and a few attempts, so the job is usually handled by someone with the right tools.
A 3.23 set is a middle-range ratio, so it balances acceleration and highway rpm. Larger tires lengthen the effective final drive, which can make the vehicle feel slower off the line. Break the new gears in gently, avoid hard launches early, and recheck the gear oil level after the first few drives.
- Set pinion depth before backlash
- Check the contact pattern with marking compound
- Recheck the cover bolts after the first drives
- Watch for whine that changes with load
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2015-323 |
| UPC | 631410105582 |
| Axle type | GM 10 Bolt, 7.5 inch or 7.625 inch ring gear |
| Axle location | Rear |
| Gear ratio | 3.23 |
| Axle manufacturer | GM |
Vehicle fitment
The set is matched to GM 10 Bolt rear axles, so confirm the ring gear size and carrier on your vehicle before ordering. A different GM axle would not be the right match.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 10 Bolt gear swap needs correct pinion depth, backlash and tooth contact, which usually means a gear shop with setup tools. Run the new set in gently while the teeth seat.
What’s included
One 3.23 ring and pinion set for GM 10 Bolt rear axles, part number 2-2015-323.
Not included: Carrier bearings, shims and hardware are sold separately and should be budgeted for.















