Overview
The G2 Axle & Gear Hammer Front Differential Cover (M186/Dana 30, bronze, part 40-2150BR) is a cast and machined nodular iron front cover, with fitment entries for Jeep Wrangler JL and Gladiator JT front axles.
G2 built the Hammer design to replace thin stamped covers, which it says can deform on rocks and damage the ring gear or cause oil leaks. Ramped extrusions on the lower third add thickness where a cover meets rocks, and the fill plug sits flush to stay out of harm’s way.
Front axles on these Jeeps take the hardest abuse from obstacles on the trail, which is why G2 built the Hammer cover from the same nodular iron as the housing itself. A thicker lower third and a flush fill plug are the two design features that most directly answer the stamped-cover problem described above. The reusable core gasket and zero-leak plug mean the cover can be reinstalled without a new gasket each time, provided the gasket stays in good shape.
Key features
- Cast and machined nodular iron, the same material as the axle housing center section
- Ramped extrusions on the lower third that help the cover slide over rocks
- Flush-mounted fill plug, magnetized to catch metal flakes
- Magnetic zero-leak plug
- Reusable multi-layer aluminum gasket
- UV-stable powder coat for corrosion resistance
Front axle protection on the trail
The front differential sits low under the Jeep, so it is one of the parts most likely to meet rocks, stumps and ledges. A cover that resists dents keeps the ring gear and pinion sealed and protected, while a flush fill plug reduces the chance of a snag. Ramped sections help the cover ride up over obstacles instead of catching on them.
Fill and drain plugs should be checked after each service and after trail use. Use the gear oil type that suits the axle and fill to the correct level. Inspect the bolts for tightness and the skid area for scrapes, and keep an eye on the gasket whenever the cover comes off.
- Check the fill level after trail use
- Inspect bolts for tightness after the first runs
- Clean the mating surface before installing a gasket
- Keep the magnetic plug clean to catch metal flakes
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 40-2150BR |
| Material | Cast and machined nodular iron |
| Finish | Bronze, UV-stable powder coat |
| Axle location | Front |
| Axle type | M186 (Dana 30 JL) |
| Drain plug | Magnetic zero-leak |
| Gasket | Reusable aluminum core |
Vehicle fitment
The fitment entries cover 2018 to 2020 Jeep Wrangler (JL) models, including two-door and four-door Rubicon, Sport, Sport S, Moab and Sahara versions, and the 2020 Jeep Gladiator in its Launch Edition, Overland, Rubicon, Sport and Sport S forms.
This M186 cover suits non-Rubicon front axles, so confirm your axle is an M186 before ordering, even though Rubicon models appear in the fitment. Fitment ends with 2020 models, so check any 2021 or later Gladiator or JL year before buying.
Installation notes
G2 provides a reusable aluminum core gasket, so keep it clean and in good condition for reinstallation.
What’s included
A bronze nodular iron front cover with a magnetic zero-leak plug and a reusable aluminum core gasket.
Not included: Gear oil.

























