Overview
The G2 Ring and Pinion Set, Dana 44 / M210 Front 5.38 Ratio, part 2-2151-538R, is a front gear set at 5.38 for Dana 44 front axles.
The set is engineered for demanding use, including oversized tires and high performance engines. Its gears are made for demanding applications and run a 5.38 ratio.
Key features
- 5.38 gear ratio
- Front axle position
- Engineered for demanding use
Setup and break-in
A front ring and pinion changes how the wheels are driven, so the gear mesh and pinion depth need to be set before the truck returns to regular driving. Gears at this ratio give quicker response from a stop and place more load on the teeth when the engine is working hard, especially on steep grades or with heavier tires. Expect the set to run warmer during the first stretch of use and to need a fresh fluid change once the break-in is complete.
Lubricant choice matters with a new set. Use the fluid type the axle requires, and avoid mixing additives unless the fluid label allows them, since friction modifiers can change how the teeth break in. Keep an eye on the front differential vent and seals during the first drives, because heat and fresh grease can reveal leaks that were hidden before the rebuild.
- Check the tooth contact pattern before the first road test
- Replace the pinion crush sleeve during a full rebuild
- Re-check bolt torque after the first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2151-538R |
| Axle location | Front |
| Axle type | Dana 44 |
| Gear ratio | 5.38 |
| Popular axle manufacture | Dana |
Vehicle fitment
Universal fit is listed, but no vehicle is named. Match the Dana 44 front axle and the 5.38 ratio to your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
At 5.38, the gear mesh and pinion depth are the critical adjustments, so plan on a setup session before the vehicle goes back on the road.
What’s included
One ring and pinion set.

















