Overview
The G2 Axle and Gear 95-2049-001 is a passenger side Dana 35 replacement axle shaft with 27 splines and a 29.04 in. overall length. It fits the 1990–2001 Jeep Cherokee (XJ), the 1997–2006 Jeep Wrangler (TJ) and the 1990–1995 Jeep Wrangler (YJ).
The shafts are forged from high grade alloy steel and heat treated.
Key features
- Passenger side Dana 35 replacement
- 27 splines
- 29.04 in. overall length
- 5 on 4.5 in. bolt circle
- 1/2 in. screw-in wheel studs fit the shaft
- 2.840 in. pilot
- Forged from high grade alloy steel
Axle shaft wear signs
An axle shaft carries drive torque from the differential to the wheel, so its splines, flange and shaft body all see steady loads. Wear often shows first at the spline area and at the stud holes, where small cracks can start. Regular inspection during tire rotations gives a clear view of these areas.
When a shaft is replaced, the matching seal and bearing should be checked as well. Clean the spline fit and inspect the flange face for burrs before assembly, since a poor seat can cause vibration. Larger tires or a more aggressive driving style add load, so inspection becomes more useful on those vehicles.
- Inspect splines for wear at each tire rotation
- Check stud holes for cracks or elongation
- Replace the axle seal when the shaft is pulled
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2049-001 |
| Axle maker | Dana |
| Axle location | Rear |
| Axle shaft location | Passenger side |
| Position | Rear |
| Axle type | Dana 35 |
| Axle spline | 27 splines |
| Overall length | 29.04 in. |
| Bolt circle | 5 on 4.5 in. |
| Pilot | 2.840 in. |
| Wheel studs | 1/2 in. screw-in fit, not included |
Vehicle fitment
It fits the 1990–2001 Jeep Cherokee (XJ) in Base, Briarwood, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trim, the 1997–2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, SE, Sahara, Sport and X trim, and the 1990–1995 Jeep Wrangler (YJ).
Wrangler TJ models run from 1997 to 2006 and YJ models from 1990 to 1995.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shaft takes 1/2 in. screw-in wheel studs, which are not included, so obtain them separately before assembly.
What’s included
One passenger side Dana 35 replacement axle shaft.
Not included: Wheel studs.









