Overview
The G2 Axle and Gear 1-2010-410 is a 4.10 ratio O.E.M. series ring and pinion for the GM 14 bolt 9.5 inch rear axle. It suits the rear location and is matched to the 9.5 inch housing.
This 4.10 O.E.M. set runs cooler and quieter than aftermarket gears. It was produced under an original equipment manufacturer contract, and the ratio is sized for the 9.5 inch 14 bolt housing.
Key features
- O.E.M. series 4.10 ring and pinion
- GM 14 bolt 9.5 inch rear axle
- Rear axle location
- Produced under contract with original equipment manufacturers.
- Runs cooler and quieter than aftermarket gears.
Care and inspection
Gear sets in a 9.5 inch 14 bolt housing run in an oil bath, so the gear oil level and condition matter a great deal. Check the level at regular intervals and watch for metal shavings on the magnet, which point to wear. Keep the rear cover gasket and pinion seal in good shape, since a leak lets the oil level drop without warning. Heavy loads and frequent trail use put more stress on the teeth and bearings than casual road driving does.
When the gears are replaced, the carrier bearings and pinion bearings should be inspected for play and roughness. Clean the housing thoroughly so no old debris reaches the new teeth. After installation, run the vehicle gently, listen for whine or clunks, and re-check the fluid level after the first few drives. A driveline shop can confirm the contact pattern if noise appears.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2010-410 |
| UPC | 631410092660 |
| Gear ratio | 4.10 |
| Axle location | Rear |
| Axle type | GM 14 bolt 9.5 inch |
| Popular axle manufacturer | GM |
| Series | O.E.M. |
Vehicle fitment
The 4.10 set is for the GM 14 bolt 9.5 inch housing. Confirm the housing size before ordering.
Only the GM 14 bolt 9.5 inch is named for this 4.10 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on the 9.5 inch 4.10 gears should be set by a driveline shop before the axle is run in.
What’s included
A matched O.E.M. series ring and pinion for the GM 14 bolt 9.5 inch rear axle.
















