Overview
The G2 Axle and Gear 4-TJRUB-513 is a 5.13 ratio front and rear ring and pinion kit for the Rubicon Jeep Wrangler TJ. The TJ chassis code covers the 1997-2006 Wrangler. The kit provides Dana 44 gear sets for the front and rear axle locations, so both ends of the driveline are set to the same ratio.
A 5.13 ratio is a numerically higher gearing, which gives more torque at the wheels for low speed work and a higher engine speed at a given road speed. G2 says these ring and pinion sets are designed to hold up to oversized tires and high performance engines.
Key features
- Front and rear 5.13 ratio ring and pinion sets
- Dana 44 gear sets for the front and rear axle locations
- Designed to hold up to oversized tires and high performance engines
- Sized for Dana 44 axle housings at each end
- Gears engineered with the latest technology and materials.
Gearing and tire size
Tire size and gear ratio are linked. Larger tires lower the effective ratio, so a set that feels right on stock tires may feel lazy on bigger ones. A numerically higher set helps regain low speed pulling force when the tires grow, while a driver who mostly drives highways may prefer less aggressive gearing.
Because the ring and pinion sets sit inside the axle housings, a gear change is also a good time to check the carrier, axle shafts and bearings. Driveline loads change at both ends after a ratio change. Recheck pinion angles if the driveshaft or suspension height has changed.
- Measure tire diameter before buying gears
- Check front and rear pinion angles after any lift
- Inspect U-joints before a higher-torque setup
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 4-TJRUB-513 |
| Gear ratio | 5.13 |
| Axle location | Front, rear |
| Axle manufacturer | Dana |
| Axle type | Dana 44 |
| Models | Rubicon |
Vehicle fitment
The chassis code in the name, the TJ for 1997-2006 Wranglers, sets the vehicle range. Dana 44 gear sets are made for the front and rear of this Rubicon TJ kit.
The TJ years run 1997 to 2006, so YJ, LJ and JK Wranglers are not covered. Check your front and rear axle types against Dana 44 before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 5.13 set changes the gear loading at both ends, so check the tire size and axle setup before the swap. Set pinion depth and gear backlash on each axle after assembly, and keep the front and rear sets with their own matching parts.
What’s included
Front and rear 5.13 ring and pinion sets for Dana 44 axles.
Not included: Carriers are outside this set.














