Overview
The G2 Axle and Gear 1-2023-513 is a 5.13 ratio O.E.M. series ring and pinion for the GM 14 bolt 10.5 inch rear axle. The rear-location set matches by axle type, so confirm the housing.
The O.E.M. series gears are designed to run cooler and quieter than aftermarket gears. A 5.13 ratio is a higher numerical ratio, so pinion setup needs care during installation.
Key features
- O.E.M. series 5.13 ring and pinion
- GM 14 bolt 10.5 inch rear axle
- Rear axle location
- Built under contract with original equipment manufacturers.
- Designed to run cooler and quieter than aftermarket gears.
Pinion setup and break-in
A higher numerical ratio such as 5.13 changes how the pinion and ring gear sit against each other, so setup is less forgiving. Pinion depth and backlash determine how the teeth load, and small errors show up as noise or early wear. A driveline shop with the right tools is the usual choice for this work, and it helps to bring the carrier and bearings in for inspection at the same time.
Break-in matters more with a taller ratio, because the teeth need an even contact pattern before they are asked for heavy towing or hard low-speed work. Drive the vehicle gently for the first stretch of miles, avoid long hard pulls, and check the gear oil level afterward. A few trail runs at moderate speed are a reasonable way to let the set settle.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2023-513 |
| UPC | 631410092875 |
| Gear ratio | 5.13 |
| Axle location | Rear |
| Axle type | GM 14 bolt 10.5 inch |
| Popular axle manufacturer | GM |
| Series | O.E.M. |
Vehicle fitment
The 5.13 set is for the GM 14 bolt 10.5 inch housing. Confirm the housing and carrier before ordering.
It is a rear-axle set for the GM 14 bolt 10.5 inch. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With a 5.13 ratio, a driveline shop should set pinion depth, backlash and bearing preload, and the gears should go through a break-in period.
What’s included
A matched O.E.M. series ring and pinion for the 14 bolt 10.5 inch rear axle.















