Overview
The G2 Axle and Gear 1-2021-373 is a 3.73 ratio O.E.M. series ring and pinion for GM 10 bolt 8.5 inch and 8.6 inch axles. It is made for front and rear locations and is numerically lower than the 4.10 or 4.56 gears in the same series.
The O.E.M. series is built to run cooler and quieter than aftermarket gears, and it was made under contract with original equipment manufacturers. The 10 bolt housing family is the axle type for this set.
Key features
- O.E.M. series 3.73 ring and pinion
- GM 10 bolt 8.5 inch and 8.6 inch axle types
- Front and rear locations listed
- Built under contract with original equipment manufacturers.
- Designed to run cooler and quieter than aftermarket gears.
Setup at a 3.73 ratio
A 3.73 ratio is a lower numerical gear, so it suits highway driving and fuel economy better than trail crawling. The trade-off is less pulling power at low speed, which matters with larger tires or heavy loads. Gearing choice is usually matched to the tires and transmission as well as the axle.
O.E.M. style gears are often installed with a matching pinion and carrier, so a full set is the usual approach. Gear marking and backlash checks confirm the contact pattern before the axle is used. Keeping the housing free of old metal debris helps new gears last.
- Use the gear oil type the axle calls for
- Replace the pinion seal during the install
- Inspect the bearing caps for wear
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2021-373 |
| UPC | 631410092813 |
| Gear ratio | 3.73 |
| Axle location | Front and rear |
| Axle type | GM 10 bolt 8.5 inch and 8.6 inch |
| Popular axle manufacturer | GM |
| Series | O.E.M. |
Vehicle fitment
This 3.73 set fits GM 10 bolt 8.5 inch and 8.6 inch axles. Confirm the housing size before ordering.
Confirm your vehicle’s year, model and trim before ordering, and confirm fit for any axle size other than 8.5 and 8.6 inch.
Installation notes
Pinion depth, backlash and bearing preload on the O.E.M. 3.73 gears should be set by a driveline shop before the axle is put into service.
What’s included
A matched O.E.M. series ring and pinion for the 3.73 ratio.
















