Overview
The G2 Axle and Gear 2-2010-488 is a 4.88 ratio ring and pinion for the GM 14 bolt 9.5 inch rear axle. It is sold for the rear location and fits the GM 14 bolt 9.5 inch axle type.
G2 describes its performance sets as engineered for oversized tires and high performance engines, made with the latest technology and materials. A 4.88 ratio multiplies torque at the wheels more than a numerically lower ratio.
Key features
- 4.88 ratio rear ring and pinion
- GM 14 bolt 9.5 inch rear axle type
- Engineered for oversized tires and high performance engines
- Made with current technology and materials
Gearing for larger tires
A 4.88 ratio multiplies torque at the wheels more than numerically lower gears, which helps a heavier or taller-tired vehicle get moving. The trade-off is higher engine speed at highway cruising and more fuel use, so this gearing is usually matched to trail or towing use rather than daily commuting.
Installing a high ratio set usually means checking the carrier, axle bearings and pinion seal, since the gears carry more load. A driveline shop can measure pinion depth and backlash to set tooth contact, and the axle should be run through a break-in period before heavy use.
- Plan a speedometer or gear calculator check after the change
- Replace worn axle bearings during the job
- Use gear oil suited to the axle
- Check tooth contact before the first drive
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2010-488 |
| UPC | 631410093407 |
| Gear ratio | 4.88 |
| Axle location | Rear |
| Axle type | GM 14 bolt 9.5 inch |
| Popular axle manufacturer | GM |
Vehicle fitment
No vehicle model or year is tied to this 4.88 set. It is built for the GM 14 bolt 9.5 inch at a 4.88 ratio, so confirm the housing size before ordering.
Only the GM 14 bolt 9.5 inch is named for this 4.88 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on the 4.88 gears should be set by a driveline shop, then the axle should be run through a break-in period.
What’s included
A 4.88 ring and pinion set for the GM 14 bolt 9.5 inch.
















