Overview
The G2 Axle and Gear 1-2094-308 is a 3.08 ratio O.E.M. series ring and pinion for the GM 7.25 inch IFS front axle. It fits the front location and is matched to the axle type with a universal fit.
G2 says its O.E.M. series gears are designed to run cooler and quieter than aftermarket gears. The company contracted with original equipment manufacturers to make them, and a 3.08 ratio gives less torque multiplication at the wheels than higher numerical ratios.
Key features
- O.E.M. series 3.08 ring and pinion
- GM 7.25 inch IFS front axle type
- Front axle location
- Built under contract with original equipment manufacturers.
- Runs cooler and quieter than aftermarket gears.
Front IFS gearing basics
Independent front suspension axles use a shorter housing and a different driveline layout than solid front axles, so the ring and pinion sits in a compact carrier set up with tight tolerances. Front gearing affects how the vehicle pulls when the front wheels are driving and how much load the front carrier sees under braking and steering. Matching the gear ratio to the rear axle keeps the drivetrain behaving predictably.
Keep front fluid at the correct level and change it on a regular schedule. Watch for leaks at the pinion seal and the axle seals, since IFS seals can be harder to reach. Pinion bearings, the crush sleeve and the carrier bearings are often replaced together when gears are changed, because they are disturbed during setup.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2094-308 |
| UPC | 631410093049 |
| Gear ratio | 3.08 |
| Axle location | Front |
| Axle type | GM 7.25 inch IFS |
| Popular axle manufacturer | GM |
| Series | O.E.M. |
Vehicle fitment
The set is matched to the GM 7.25 inch IFS at a 3.08 ratio. Confirm the axle type before ordering.
Only the GM 7.25 inch IFS is named for this 3.08 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
On an IFS front axle, a driveline shop should set pinion depth, backlash and bearing preload before a break-in period on the 3.08 gears.
What’s included
A matched O.E.M. series ring and pinion for the 7.25 inch IFS front axle.
















