Overview
The G2 Axle and Gear 2-2095-373 is a 3.73 ratio ring and pinion for the front GM 8.25 Inch IFS axle. IFS means independent front suspension, and the attribute list places this set at the front. The pinion turns 3.73 times for each ring gear revolution, a middle-range ratio that gives solid low-speed pulling while keeping highway rpm moderate.
G2 describes its Performance Ring and Pinion range as built for oversized tires and high-performance engines, using current materials and manufacturing methods. No vehicles or model years are named. The 8.25 inch GM IFS housing and its front position are what the buyer should confirm before purchase.
Key features
- 3.73 gear ratio for the GM 8.25 Inch IFS axle
- Front axle location
- Ring gear and pinion supplied as one matched set
- Designed for oversized tires and high-performance engines.
- Manufactured with current technology and materials.
Front differential care
A front gear set works under steering loads and road shock, so the carrier and its bearings need to be solid before the new gears go in. The 3.73 ratio gives steady low-speed pulling at the front wheels and keeps highway rpm moderate. Front ratios are usually chosen with the tire size and the vehicle’s drive use in mind.
Front carriers are often opened only for gear work, so it is the right time to check related parts. Pinion seals, carrier bearings, axle seals and the front driveshaft U-joints are commonly inspected together. Keep the front gear oil fresh and watch for leaks after the first drives.
- Check the front carrier bearings for play
- Inspect axle seals and boots
- Look over the front driveshaft U-joints
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2095-373 |
| UPC | 631410094770 |
| Axle type | GM 8.25 Inches IFS |
| Axle location | Front |
| Gear ratio | 3.73 |
| Axle manufacturer | GM |
Vehicle fitment
Confirm the front GM 8.25 inch IFS axle on your vehicle, including its size, before ordering. Measure the housing and make sure the set matches that unit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front gear sets need measured pinion depth, backlash and bearing preload, and a gear shop is usually the installer. Allow a break-in period before heavy loads.
What’s included
One 3.73 ring and pinion set for the front GM 8.25 Inch IFS axle, part number 2-2095-373.
Not included: Carrier bearings and shims are not part of the 3.73 front set. Check the package contents against your installation before starting.
















