Overview
The G2 Axle and Gear 95-2021-007 is a replacement rear axle shaft for GM 10 bolt axles, fitting both the 8.2 inch and 8.5 inch axle types. It is for the driver or passenger side and has 28 splines.
The shaft is forged from high grade alloy steel and heat treated beyond OEM specifications. Its rolled splines, better materials and Big Spline options suit high torque work and larger tires.
Key features
- Forged from high grade alloy steel
- Heat treated to exceed OEM specifications
- Rolled splines and better materials for high torque loads
- Big Spline options are offered for larger tires.
- 28 splines on the rear axle shaft
Matching your housing
Because this shaft covers two axle sizes, the first job is identifying which one your housing uses. Look for the axle code on the tube or cover, and measure the flange if you can. Mixing up the two sizes can leave a shaft that looks right but does not seat correctly in the differential or the hub.
Spline count is the second check. Compare the teeth on your old shaft with the new one, and look for rounding or twisting that would point to a worn part. When the shaft is out, inspect the wheel bearing and seal, since these parts affect how well the new shaft runs under load.
- Identify the axle size from the housing
- Compare the spline teeth on old and new shafts
- Inspect the bearing and seal during removal
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2021-007 |
| UPC | 631410106176 |
| Axle type | GM 8.2 inch or GM 10 bolt 8.5 inch |
| Axle location | Rear |
| Shaft location | Driver or passenger |
| Spline count | 28 splines |
| Material | High grade alloy steel |
Vehicle fitment
This shaft is Universal Fit with no make, model or year attached. Two axle types are covered, so the size of your housing decides fit.
Confirm which axle size your housing uses before you select this shaft. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because two axle types are named, check which one your housing uses and then compare the 28 spline count on your existing shaft. Raise and support the vehicle on stands before working underneath it.
What’s included
This is one axle shaft for the driver or passenger side. Check bearings, seals and fasteners against your installation before starting.








