Overview
The G2 Axle and Gear 95-2011-007 is a Ford 9 inch rear axle shaft with 31 splines, made for the 1975–1986 Ford F-150. Its forged alloy steel is heat treated beyond OEM specifications and built for high torque use.
This shaft works on either side of the rear axle and takes 1/2 inch press fit wheel studs, which are not included. The fit range runs 1975–1986 for the F-150, and the E-150 van falls outside it. One part number covers both rear positions, so replacing both shafts means buying two of the same part. Wheel studs need to be sourced separately. The 1975–1986 range is the dependable guide for fit.
Key features
- Rear axle shaft for the Ford 9 inch axle
- 31 splines
- Driver or passenger side
- 1/2 inch press fit wheel studs
- Forged from high grade alloy steel.
- Heat treated to exceed OEM specifications.
Working with press fit studs
Press fit studs are pressed into the shaft flange, so the flange hole and the stud shoulder must be clean and free of burrs. A stud that goes in crooked can pull or seize, and a damaged hole makes the wheel sit loose. Use a stud press rather than a hammer to keep the stud straight.
Because this shaft serves either side, the same stud style goes on both positions. Check each stud for full seating before mounting a wheel, and re-check lug nuts after a short drive. A press fit stud that moves is a sign of an undersized hole.
Inspect the shaft flange for cracks each time the wheel comes off. Worn splines, a rough bearing or grease leaking past the seal are reasons to replace the shaft rather than reuse it.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2011-007 |
| UPC | 631410105865 |
| Axle manufacturer | Ford |
| Shaft location | Driver Or Passenger |
| Axle position | Rear |
| Axle type | Ford 9 Inches |
| Position | Rear |
| Spline count | 31 Splines |
| Wheel stud size | 1/2 inch press fit |
| Material | High grade alloy steel, forged |
| Applications noted | 1974-1986 F150/E150 |
Vehicle fitment
It fits the Ford F-150 in many trims across 1975–1986.
- 1975–1986 Ford F-150 (Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT, XL, XLS, XLT, XLT Lariat)
The list runs 1975–1986 for the F-150 only. The E-150, other Ford trucks and other axle sizes are not in it. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear axle shaft.
Not included: wheel studs.







