Overview
The G2 Axle and Gear 95-2028-004 is a forged 1541H steel rear axle shaft for the Chrysler 9.25 inch axle, made for the 1994-and-later Ram 1500. It has 31 splines and a 5 on 5.5 bolt pattern.
G2 marks it LH/RH for either side. The company also says its shafts are heat treated to exceed OEM specifications for high-torque use.
The 95-2028-004 combines forged 1541H steel with a 5 on 5.5 bolt pattern for the Chrysler 9.25 inch rear axle. It has 31 splines and is marked LH/RH, so it works on either side. G2 Axle and Gear says its shafts are heat treated to exceed OEM specifications. Its vehicle list covers two separate stretches of Ram 1500 years.
Key features
- Forged 1541H steel
- 31 splines
- 5 on 5.5 bolt pattern
- LH/RH, either side
- Chrysler 9.25 inch rear axle
- Heat treated beyond OEM specifications
Matching splines and bolt pattern
On a Chrysler 9.25 inch axle, the spline count and bolt pattern have to match the rest of the wheel and gear setup. The shaft carries drive torque from the differential to the hub, so a spline mismatch will wear the gear end quickly. Measure the old shaft’s spline count and check the bolt pattern on the wheel before ordering. Forged steel shafts handle torque well, but they still depend on the hub and splines being in good shape.
Before installation, inspect the hub and axle flange for wear or cracks. Replace worn wheel studs, since a loose stud can damage the threads and let a wheel shift. Check the brake components while the wheel is off, and clean the splines before the shaft is pushed into place. After the first few drives, check the retainer bolts and wheel lug nuts for tightness.
- Count the old shaft’s splines
- Confirm the wheel bolt pattern
- Inspect hub and flange for cracks
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2028-004 |
| UPC | 631410106251 |
| Product type | Replacement axle shaft |
| Axle type | Chrysler 9.25 inch |
| Axle location | Rear |
| Shaft position | Driver Or Passenger |
| Spline count | 31 |
| Material | Forged 1541H steel |
| Bolt pattern | 5 on 5.5 |
| Stated application | 94-Up Ram 1500 |
Vehicle fitment
It fits the Dodge Ram 1500 in 1994–1996 and 2004–2005.
Despite the 94-Up wording, the vehicle list does not include 1997 through 2003 or any year after 2005. Confirm a truck outside the listed years with G2. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Check your wheels against the 5 on 5.5 bolt pattern.
- Match the 31 splines to your gears.
What’s included
One rear axle shaft that fits either side (95-2028-004).
Not included: wheel studs.







