Overview
The G2 Axle and Gear 1-2010-373 is a 3.73 ratio O.E.M. series ring and pinion for the GM 14 bolt 9.5 inch rear axle. It is made for the rear location and the 9.5 inch housing type.
The O.E.M. series gears in this 3.73 set run cooler and quieter than aftermarket gears. They are made under contract with original equipment manufacturers and sized for the 9.5 inch 14 bolt housing.
Key features
- O.E.M. series 3.73 ring and pinion
- GM 14 bolt 9.5 inch rear axle
- Rear axle location
- Built under contract with original equipment manufacturers.
- Designed to run cooler and quieter than aftermarket gears.
Gear ratio and daily driving
A 3.73 ratio sits in the middle of the gearing range for this housing family. It keeps engine speed moderate on the highway while still giving steady pull from a stop. Compared with a lower numerical ratio, the set feels more responsive in traffic, and it runs a bit faster at cruising speed.
Changing the ratio also changes speedometer reading and the feel of the final drive, so tire size should be reviewed at the same time. Larger tires lower the effective ratio and can make the gears feel weak under load. A driveline shop can check the setup after the swap and confirm the teeth are carrying load evenly.
- Review tire size when changing the ratio
- Check speedometer calibration after the swap
- Keep the ring and pinion as a matched pair
- Plan a break-in period before heavy towing
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2010-373 |
| UPC | 631410092653 |
| Gear ratio | 3.73 |
| Axle location | Rear |
| Axle type | GM 14 bolt 9.5 inch |
| Popular axle manufacturer | GM |
| Series | O.E.M. |
Vehicle fitment
This 3.73 set is made for the GM 14 bolt 9.5 inch at a 3.73 ratio. Confirm the housing size before ordering.
Only the GM 14 bolt 9.5 inch is named for this 3.73 set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A driveline shop should set pinion depth, backlash and bearing preload on the 9.5 inch 3.73 gears, followed by a break-in period.
What’s included
A matched O.E.M. series ring and pinion for the GM 14 bolt 9.5 inch rear axle.
















